The Rivet,solid, cataloged under National Stock Number 5320-00-556-9284, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. Government technical data includes 10 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-00-556-9284 |
| Item Name | Rivet,solid |
| FSC / FSG | 5320 / 53 — Rivets |
| Status | ACTIVE |
| Shank Diameter | 0.186 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN |
| Fastener Length | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL |
| Head Style | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| Shank Style | STRAIGHT W/RADIUS CHAMFERED TIP |
| Surface Treatment | ANODIZE OR CHROMATE OVERALL |
| Countersink Angle | 99.5 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM |
| Shear Strength | 37000 SINGLE POUNDS PER SQUARE INCH |
| Material | ALUMINUM ALLOY 2024 OVERALL |
| Head Major Diameter | 0.349 INCHES MINIMUM AND 0.357 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS20426DD6-4 | 3/2 Design control — primary reference U.S. Government activity |
| MS20426DD6-4 | 5/9 Secondary reference U.S. Government activity |
NSN 5320-00-556-9284 is a Rivet,solid, classified under FSC 5320, Rivets. Status: active.
Key specifications for 5320-00-556-9284: Shank Diameter: 0.186 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN; Fastener Length: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN; Surface Treatment Document and Classification: MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL; Head Style: FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER). 10 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.