The Rivet,blind, cataloged under National Stock Number 5320-00-486-3210, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 8 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-00-486-3210 |
| Item Name | Rivet,blind |
| FSC / FSG | 5320 / 53 — Rivets |
| Status | ACTIVE |
| Shank Diameter | 0.310 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN |
| Fastener Length | 1.866 INCHES MINIMUM AND 1.896 INCHES MAXIMUM IN |
| Expansion Device | SERRATED STEM-TYPE W |
| Surface Treatment Document and Classification | QQ-P-416,TY 1 OR 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE STEM |
| Surface Treatment Document and Classification | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE BODY |
| Hardness Rating | 48.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM STEM |
| Hardness Rating | 32.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM BODY |
| Material Document and Classification | QQ-W-405 FED SPEC 1ST MATERIAL RESPONSE OR QQ-W-405 FED SPEC 2ND MATERIAL RESPONSE OR MIL-C-6758 MIL SPEC 2ND MATERIAL RESPONSE BODY |
| Material Document and Classification | QQ-W-405 FED SPEC SINGLE MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE STEM |
| Head Style | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| Grip Length | 1.594 INCHES MINIMUM AND 1.657 INCHES MAXIMUM IN |
| Shank Style | SELF-PLUGGING MECHANICALLY LOCKED STEM |
| Surface Treatment | CADMIUM STEM |
| Surface Treatment | CADMIUM BODY |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Shear Strength | 8500 SINGLE POUNDS PER SQUARE INCH |
| Material | STEEL COMP 8740 STEM |
| Material | STEEL COMP 4037 OR STEEL COMP 4130 BODY |
| Head Major Diameter | 0.634 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS90353-1026 | 5/9 Secondary reference U.S. Government activity |
| B100-T10-26 | 5/9 Secondary reference Huck International, Inc |
| 73756-10-26 | 5/1 Secondary reference Sps Technologies, Llc Dba PB Fasteners |
| NASM90353 | 3/1 Design control — primary reference U.S. Government activity |
| B100-T10-26 | 5/9 Secondary reference Huck Mfg Co |
| MS90353-1026 | 3/2 Design control — primary reference U.S. Government activity |
| VB90353-10-26 | 5/1 Secondary reference U.S. Government activity |
| B100-T10-26 | 5/1 Secondary reference Huck International, Inc. Div Huck Products Division |
NSN 5320-00-486-3210 is a Rivet,blind, classified under FSC 5320, Rivets. Status: active.
Key specifications for 5320-00-486-3210: Shank Diameter: 0.310 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN; Fastener Length: 1.866 INCHES MINIMUM AND 1.896 INCHES MAXIMUM IN; Expansion Device: SERRATED STEM-TYPE W; Surface Treatment Document and Classification: QQ-P-416,TY 1 OR 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE STEM. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.