The Pin-Rivet, cataloged under National Stock Number 5320-00-409-5804, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. The manufacturer of record is West Coast Aerospace, Inc.. Government technical data includes 19 specifications, cited from the U.S. Government catalog. The record lists 10 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 8 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-00-409-5804 |
| Primary Part Number | HL1054-8-8 |
| Item Name | Pin-Rivet |
| FSC / FSG | 5320 / 53 — Rivets |
| Manufacturer | West Coast Aerospace, Inc. |
| Status | ACTIVE |
| Shank Diameter | 0.280 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN |
| Head Height | 0.077 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN |
| Fastener Length | 0.885 INCHES MINIMUM AND 0.905 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Material Document and Classification | MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 4TH MATERIAL RESPONSE OVERALL |
| Head Style | FLUSH COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.250 INCHES IN |
| Grip Length | 0.505 INCHES MAXIMUM IN |
| Width Between Flats | 0.095 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN |
| Shank Style | PIN-RIVET, STRAIGHT, THREADED |
| Surface Treatment | CADMIUM OVERALL |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Shear Strength | 85000 SINGLE POUNDS PER SQUARE INCH |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 28 |
| Material | STEEL COMP E4340 OR STEEL COMP 4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Major Diameter | 0.435 INCHES MINIMUM AND 0.460 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| HL1054-8-8 | West Coast Aerospace, Inc. (USA) |
| HL1054-8-8 | Howmet Global Fastening Systems Inc (USA) |
| HL1054-8-8 | Huck International, Inc (USA) |
| HL1054-8-8 | Sps Technologies, Llc Dba PB Fasteners (USA) |
| HL1054-8-8 | Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc (CAN) |
| HL1054-8-8 | Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company (USA) |
| HL1054-8-8 | Hi-Shear Corporation (USA) |
| HL1054-8-8 | Howmet Global Fastening Systems Inc Div City of Industry Operations (USA) |
| L806Y8-8 | Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company (USA) |
| HL220-8-8 | Satair A/s (DNK) |
| Reference | Meaning |
|---|---|
| BACB30MD8-8 | 5/9 Secondary reference West Coast Aerospace, Inc. |
| BACB30MD8-8 | 3/2 Design control — primary reference U.S. Government activity |
| HL220-8-8 | 5/9 Secondary reference U.S. Government activity |
| HL220-8-8 | 5/9 Secondary reference Sps Technologies, Llc Dba PB Fasteners |
| HL220-8-8 | 5/9 Secondary reference Howmet Global Fastening Systems Inc. Div Voi-Shan Products |
| HL220-8-8 | 5/9 Secondary reference U.S. Government activity |
| HL220-8-8 | 5/9 Secondary reference Huck International, Inc |
| HL220-8-8 | 5/9 Secondary reference Hi-Shear Corporation |
NSN 5320-00-409-5804 is a Pin-Rivet, manufactured by West Coast Aerospace, Inc., classified under FSC 5320, Rivets. Status: active.
NSN 5320-00-409-5804 has 10 manufacturer part numbers on file: HL1054-8-8 (West Coast Aerospace, Inc.), HL1054-8-8 (Howmet Global Fastening Systems Inc), HL1054-8-8 (Huck International, Inc), HL1054-8-8 (Sps Technologies, Llc Dba PB Fasteners), HL1054-8-8 (Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc) and 5 more.
Key specifications for HL1054-8-8: Shank Diameter: 0.280 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN; Head Height: 0.077 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN; Fastener Length: 0.885 INCHES MINIMUM AND 0.905 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.