The Rivet,solid, cataloged under National Stock Number 5320-00-264-4252, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. Government technical data includes 10 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-00-264-4252 |
| Item Name | Rivet,solid |
| FSC / FSG | 5320 / 53 — Rivets |
| Status | ACTIVE |
| Shank Diameter | 0.094 INCHES NOMINAL IN |
| Fastener Length | 1.125 INCHES NOMINAL IN |
| Material Document and Classification | MIL-W-7986 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Head Style | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| Departure From Cited Document | AS MODIFIED BY LENGTH OF RIVET |
| Shank Style | STRAIGHT |
| Surface Treatment | ANODIZE OVERALL |
| Countersink Angle | 100.0 DEGREES NOMINAL |
| Material | ALUMINUM ALLOY 2117 OVERALL |
| Head Major Diameter | 0.175 INCHES MINIMUM AND 0.183 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS20426AA3-18 | 3/2 Design control — primary reference U.S. Government activity |
| MS20426AA3-18 | 5/9 Secondary reference U.S. Government activity |
| AN426 | 5/9 Secondary reference U.S. Government activity |
NSN 5320-00-264-4252 is a Rivet,solid, classified under FSC 5320, Rivets. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 5306-00-638-2218. Verify interchangeability with system specifications before substitution.
Key specifications for 5320-00-264-4252: Shank Diameter: 0.094 INCHES NOMINAL IN; Fastener Length: 1.125 INCHES NOMINAL IN; Material Document and Classification: MIL-W-7986 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL; Head Style: FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER). 10 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.