The Pin-Rivet, cataloged under National Stock Number 5320-00-262-7718, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. Government technical data includes 11 specifications, cited from the U.S. Government catalog. 5 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 4 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-00-262-7718 |
| Item Name | Pin-Rivet |
| FSC / FSG | 5320 / 53 — Rivets |
| Status | ACTIVE |
| Shank Diameter | 0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN |
| Fastener Length | 0.639 INCHES MINIMUM AND 0.659 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Head Style | FLUSH COUNTERSUNK |
| Grip Length | 0.282 INCHES MINIMUM AND 0.344 INCHES MAXIMUM IN |
| Shank Style | STUMP |
| Surface Treatment | CADMIUM OVERALL |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Material | STEEL OVERALL |
| Head Major Diameter | 0.454 INCHES MINIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS1488-05 | 3/2 Design control — primary reference U.S. Government activity |
| ASCT509T8-5 | 5/9 Secondary reference Huck Mfg Co |
| ALS509T8-5 | 5/9 Secondary reference Huck Mfg Co |
| 1488-5 | 5/9 Secondary reference Huck Mfg Co |
| 2LS509-T08-05 | 5/9 Secondary reference Huck International, Inc |
NSN 5320-00-262-7718 is a Pin-Rivet, classified under FSC 5320, Rivets. Status: active.
4 possible matches (shared part number, not a government interchangeability claim): 4820-00-909-8731, 5915-00-949-0213, 5315-01-361-6948. Verify interchangeability with system specifications before substitution.
Key specifications for 5320-00-262-7718: Shank Diameter: 0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN; Fastener Length: 0.639 INCHES MINIMUM AND 0.659 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Head Style: FLUSH COUNTERSUNK. 11 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.