PartsTable TECHNICAL DATA SHEET
NSN 5320-00-240-9567Government record, cited

Pin-Rivet5320-00-240-9567

NSN 5320-00-240-9567 · NIIN 002409567 · Part number HL910-8-2
Hi-Shear Corporation · FSC 5320 — Rivets · FSG 53 — Hardware and Abrasives · CAGE 73197
Government record, cited
NSN 5320-00-240-9567 — this item is cataloged by the U.S. Government under National Stock Number 5320-00-240-9567. Manufacturer of record part number: HL910-8-2.
Also searched as  5320-00-240-9567 · 5320002409567 · NIIN 002409567 · 00-240-9567 · FSC 5320 Rivets · CAGE 73197 · HL910-8-2 · HL10V8-2 · CA-325D08LN02 · STSAF009D08LN02
Nearby stock numbers  ·
Features
  • Pin-Rivet — FSC 5320
  • Shank Diameter: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN
  • Lubrication: CETYL ALCOHOL
  • Head Height: 0.059 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
  • Fastener Length: 0.510 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN
  • Material Document and Classification: AMS 4971 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
  • Thread Direction: RIGHT-HAND
  • Nominal Thread Size: 0.250 INCHES IN
Identification
  • NSN: 5320-00-240-9567
  • NIIN: 002409567
  • FSC: 5320 — Rivets
  • FSG: 53 — Hardware and Abrasives
  • Primary part number: HL910-8-2
  • Manufacturer: Hi-Shear Corporation
General Description

The Pin-Rivet, cataloged under National Stock Number 5320-00-240-9567, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. The manufacturer of record is Hi-Shear Corporation. Government technical data includes 15 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 6 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5320-00-240-9567
Primary Part NumberHL910-8-2
Item NamePin-Rivet
FSC / FSG5320 / 53 — Rivets
ManufacturerHi-Shear Corporation
StatusACTIVE
Shank Diameter0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN
LubricationCETYL ALCOHOL
Head Height0.059 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
Fastener Length0.510 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN
Material Document and ClassificationAMS 4971 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
Thread DirectionRIGHT-HAND
Nominal Thread Size0.250 INCHES IN
Grip Length0.130 INCHES MAXIMUM IN
Width Between Flats0.095 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN
Shank StylePIN-RIVET, STRAIGHT, THREADED
Shear Strength108000 SINGLE POUNDS PER SQUARE INCH
Thread Class3A A
MaterialTITANIUM ALLOY OVERALL
Thread Series DesignatorUNIFIED NATIONAL JOINT FINE (UNJF)
Head Major Diameter0.387 INCHES MINIMUM AND 0.412 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
HL910-8-2 Sps Technologies, Llc Dba PB Fasteners (USA)
HL910-8-2 PRIMARY Hi-Shear Corporation (USA)
Reference documents
ReferenceMeaning
HL10V8-2 C/1 Advisory reference — outside the item-of-supply concept
Zf Industrieantriebe Witten Gmbh
CA-325D08LN02 5/2 Secondary reference
U.S. Government activity
HL910-8-2 5/9 Secondary reference
U.S. Government activity
STSAF009D08LN02 7/2 Vendor item drawing reference
U.S. Government activity
HL910-8-2 5/9 Secondary reference
Howmet Global Fastening Systems Inc
HL910-8-2 5/2 Secondary reference
U.S. Government activity

Frequently Asked Questions

What is NSN 5320-00-240-9567?

NSN 5320-00-240-9567 is a Pin-Rivet, manufactured by Hi-Shear Corporation, classified under FSC 5320, Rivets. Status: active.

What part numbers are listed for NSN 5320-00-240-9567?

NSN 5320-00-240-9567 has 2 manufacturer part numbers on file: HL910-8-2 (Sps Technologies, Llc Dba PB Fasteners), HL910-8-2 (Hi-Shear Corporation).

What are the specifications of HL910-8-2?

Key specifications for HL910-8-2: Shank Diameter: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN; Lubrication: CETYL ALCOHOL; Head Height: 0.059 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN; Fastener Length: 0.510 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN. 15 specifications are documented in the U.S. Government catalog.

Is NSN 5320-00-240-9567 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com