The Rivet,tubular, cataloged under National Stock Number 5320-00-050-1208, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. The manufacturer of record is Army Weapons Command Attn Amswe-Ree-S. Government technical data includes 9 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-00-050-1208 |
| Primary Part Number | 501208 |
| Item Name | Rivet,tubular |
| FSC / FSG | 5320 / 53 — Rivets |
| Manufacturer | Army Weapons Command Attn Amswe-Ree-S |
| Status | ACTIVE |
| Shank Diameter | 0.181 INCHES MINIMUM AND 0.191 INCHES MAXIMUM IN |
| Fastener Length | 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN |
| Hole Depth | 0.188 INCHES NOMINAL IN |
| Head Style | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| Shank Style | TUBULAR |
| Countersink Angle | 100.0 DEGREES NOMINAL |
| Material | STEEL OVERALL |
| Head Major Diameter | 0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN |
| Hole Diameter | 0.133 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 501208 | Army Weapons Command Attn Amswe-Ree-S (USA) |
NSN 5320-00-050-1208 is a Rivet,tubular, manufactured by Army Weapons Command Attn Amswe-Ree-S, classified under FSC 5320, Rivets. Status: active.
NSN 5320-00-050-1208 has 1 manufacturer part number on file: 501208 (Army Weapons Command Attn Amswe-Ree-S).
1 possible match (shared part number, not a government interchangeability claim): 6115-01-463-4998. Verify interchangeability with system specifications before substitution.
Key specifications for 501208: Shank Diameter: 0.181 INCHES MINIMUM AND 0.191 INCHES MAXIMUM IN; Fastener Length: 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN; Hole Depth: 0.188 INCHES NOMINAL IN; Head Style: FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER). 9 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.