The Pin-Rivet, cataloged under National Stock Number 5320-00-034-5246, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. The manufacturer of record is Huck International, Inc. Government technical data includes 20 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-00-034-5246 |
| Primary Part Number | 2ASPFF-DT10-16 |
| Item Name | Pin-Rivet |
| FSC / FSG | 5320 / 53 — Rivets |
| Manufacturer | Huck International, Inc |
| Status | ACTIVE |
| Shank Diameter | 0.325 INCHES MINIMUM AND 0.329 INCHES MAXIMUM IN |
| Fastener Length | 1.035 INCHES MINIMUM AND 1.055 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Heat Treatment | AS FABRICATED OVERALL |
| Material Document and Classification | MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Head Style | FLUSH COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.250 INCHES IN |
| Grip Length | 0.939 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN |
| Width Between Flats | 0.125 INCHES NOMINAL IN |
| Shank Style | PIN-RIVET, STRAIGHT, THREADED |
| Surface Treatment | CADMIUM OVERALL |
| Minimum Tensile Strength | 180000 POUNDS PER SQUARE INCH LBS |
| Countersink Angle | 100.0 DEGREES NOMINAL |
| Shear Strength | 108000 SINGLE POUNDS PER SQUARE INCH |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 40 |
| Material | STEEL COMP 8740 OVERALL |
| Thread Series Designator | UNS |
| Head Major Diameter | 0.479 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 2ASPFF-DT10-16 PRIMARY | Huck International, Inc (USA) |
| Reference | Meaning |
|---|---|
| 2ASPFF-DT10-16 | 5/9 Secondary reference Huck Mfg Co |
| GB512G10-16 | 7/2 Vendor item drawing reference Northrop Grumman Systems Corporation |
NSN 5320-00-034-5246 is a Pin-Rivet, manufactured by Huck International, Inc, classified under FSC 5320, Rivets. Status: active.
NSN 5320-00-034-5246 has 1 manufacturer part number on file: 2ASPFF-DT10-16 (Huck International, Inc).
Key specifications for 2ASPFF-DT10-16: Shank Diameter: 0.325 INCHES MINIMUM AND 0.329 INCHES MAXIMUM IN; Fastener Length: 1.035 INCHES MINIMUM AND 1.055 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Heat Treatment: AS FABRICATED OVERALL. 20 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.