The Rivet,tubular, cataloged under National Stock Number 5320-00-013-7948, is classified within Federal Supply Class 5320 (Rivets) of the Hardware and Abrasives group. Government technical data includes 11 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5320-00-013-7948 |
| Item Name | Rivet,tubular |
| FSC / FSG | 5320 / 53 — Rivets |
| Status | ACTIVE |
| Shank Diameter | 0.141 INCHES MINIMUM AND 0.146 INCHES MAXIMUM IN |
| Fastener Length | 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Hole Depth | 0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN |
| Material Document and Classification | 66 FED STD ALL MATERIAL RESPONSES OVERALL |
| Head Style | OVAL/TRUSS |
| Shank Style | TUBULAR |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Shear Strength | 36000 DOUBLE POUNDS PER SQUARE INCH |
| Material | STEEL COMP 1005 OR STEEL COMP 1006 OR STEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1012 OR STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OVERALL |
| Hole Diameter | 0.099 INCHES MINIMUM AND 0.104 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 16X0.188 | 5/9 Secondary reference Textron Inc Townsend Div Townsend Fastening Systems Operation |
| MS16535-213 | 2/2 Government specification standardization U.S. Government activity |
NSN 5320-00-013-7948 is a Rivet,tubular, classified under FSC 5320, Rivets. Status: active.
Key specifications for 5320-00-013-7948: Shank Diameter: 0.141 INCHES MINIMUM AND 0.146 INCHES MAXIMUM IN; Fastener Length: 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Hole Depth: 0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN. 11 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.