The Rivet,solid, cataloged under National Stock Number 5320-00-010-4217, is classified within Federal Supply Class 5320 (No Item Name Available) of the Hardware and Abrasives group. The primary manufacturer of record is Army Weapons Command Attn Amswe-Ree-S. Government technical data includes 9 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 1 commercial cross-reference from 1 manufacturer, enabling identification through both NSN and commercial part number lookups. 2 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Cancelled.
| Parameter | Value |
|---|---|
| NSN | 5320-00-010-4217 |
| Primary Part Number | 104217 |
| Item Name | Rivet,solid |
| FSC / FSG | 5320 / 53 — No Item Name Available |
| Manufacturer | Army Weapons Command Attn Amswe-Ree-S |
| Status | CANCELLED |
| Head Style | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| Head Major Diameter | 0.874 INCHES MINIMUM AND 0.936 INCHES MAXIMUM IN |
| Fastener Length | 1.656 INCHES MINIMUM AND 1.844 INCHES MAXIMUM IN |
| Shank Style | STRAIGHT |
| Countersink Angle | 78.0 DEGREES NOMINAL |
| Shank Diameter | 0.478 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN |
| Material | STEEL COMP 1008 OVERALL |
| Material Document and Classification | SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Heat Treatment | ANNEALED OVERALL |
| Acquisition Status | CANCELLED |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| 104217 | Army Weapons Command Attn Amswe-Ree-S (USA) |
NSN 5320-00-010-4217 is a Rivet,solid, manufactured by Army Weapons Command Attn Amswe-Ree-S, classified under FSC 5320 (No Item Name Available). Status: cancelled.
NSN 5320-00-010-4217 has 1 cross-referenced part number: 104217 (Army Weapons Command Attn Amswe-Ree-S).
There are 2 known substitutes for 5320-00-010-4217: 3020-00-354-3117, 6110-00-733-6003. Verify interchangeability with system specifications before substitution.
Key specifications for 104217: Head Style: FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER); Head Major Diameter: 0.874 INCHES MINIMUM AND 0.936 INCHES MAXIMUM IN; Fastener Length: 1.656 INCHES MINIMUM AND 1.844 INCHES MAXIMUM IN; Shank Style: STRAIGHT. 9 total characteristics are documented in the Federal Logistics Information System.
NSN 5320-00-010-4217 is currently cancelled. Check with the Defense Logistics Agency for current availability and authorized substitutes.