PartsTable
Technical Data Sheet
Download PDF

5318X1C0 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

5318X1C0: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 3.5425 INCHES MINIMUM AND 3.5433 INCHES MAXIMUM IN, contact_angle: 25.0 DEGREES NOMINAL, overall_width: 2.8700 INCHES MINIMUM AND 2.8750 INCHES MAXIMUM IN, load_direction: ANGULAR. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-436-1208, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5318X1C0
NSN: 3110-01-436-1208
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 43334 — GENERAL MOTORS CORP DELCO MORAINE NDH DIV (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter3.5425 INCHES MINIMUM AND 3.5433 INCHES MAXIMUM IN
contact_angle25.0 DEGREES NOMINAL
overall_width2.8700 INCHES MINIMUM AND 2.8750 INCHES MAXIMUM IN
load_directionANGULAR
surface_finishGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
overall_outside_diameter7.4793 INCHES MINIMUM AND 7.4805 INCHES MAXIMUM IN
internal_fit-up_contact_angular_directionINWARD CONVERGENT
NSN3110-01-436-1208
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 5318X1C0 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 7.4793 INCHES MINIMUM AND 7.4805 INCHES MAXIMUM IN
•
BORE SHAPE: STRAIGHT
•
CONTACT ANGLE: 25.0 DEGREES NOMINAL
•
LOAD DIRECTION: ANGULAR
•
INTERNAL FIT-UP CONTACT ANGULAR DIRECTION: INWARD CONVERGENT
TECHNICAL CHARACTERISTICS
SURFACE FINISHGROUND
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
OVERALL WIDTH2.8700 INCHES MINIMUM AND 2.8750 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER7.4793 INCHES MINIMUM AND 7.4805 INCHES MAXIMUM IN
BORE SHAPESTRAIGHT
CONTACT ANGLE25.0 DEGREES NOMINAL
LOAD DIRECTIONANGULAR
INTERNAL FIT-UP CONTACT ANGULAR DIRECTIONINWARD CONVERGENT
BORE DIAMETER3.5425 INCHES MINIMUM AND 3.5433 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
716062Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5318X1C0?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5318X1C0?
5318X1C0 is a BEARING,BALL,ANNULAR.
What parts can replace 5318X1C0?
There is 1 known substitute for 5318X1C0: 716062. Substitute compatibility should be verified for your specific system.
What is the NSN for 5318X1C0?
5318X1C0 is cataloged in the U.S. Government catalog under NSN 3110-01-436-1208. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5318X1C0

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.