PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 53175T
53175T ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include taper: 1.000 PER FOOT IN INCHES NOMINAL, material: STEEL OVERALL, cone_width: 1.7500 INCHES NOMINAL IN, bore_diameter: 1.7500 INCHES NOMINAL IN, style_designator: STEEP ANGLE, TAPERED BORE, cone_corner_radius: 0.0938 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-836-9611, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
53175T
NSN: 3110-00-836-9611
FSC: 3110
CAGE: 60038 — THE TIMKEN CORPORATION (USA)
SPECIFICATIONS
taper1.000 PER FOOT IN INCHES NOMINAL
materialSTEEL OVERALL
cone_width1.7500 INCHES NOMINAL IN
bore_diameter1.7500 INCHES NOMINAL IN
style_designatorSTEEP ANGLE, TAPERED BORE
cone_corner_radius0.0938 INCHES NOMINAL IN
retainer_fabrication_methodPRESSED
standard_tolerance_designationAFBMA CLASS 2
NSN3110-00-836-9611
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 53175T · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONE CORNER RADIUS: 0.0938 INCHES NOMINAL IN
•
TAPER: 1.000 PER FOOT IN INCHES NOMINAL
•
STYLE DESIGNATOR: STEEP ANGLE, TAPERED BORE
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
RETAINER FABRICATION METHOD: PRESSED
•
CONE WIDTH: 1.7500 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
BORE DIAMETER: 1.7500 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
CONE CORNER RADIUS0.0938 INCHES NOMINAL IN
TAPER1.000 PER FOOT IN INCHES NOMINAL
STYLE DESIGNATORSTEEP ANGLE, TAPERED BORE
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
RETAINER FABRICATION METHODPRESSED
CONE WIDTH1.7500 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
BORE DIAMETER1.7500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
K3Interchangeable
interchangeable cross-reference
interchangeable
23601-00160Interchangeable
interchangeable cross-reference
interchangeable
6131Interchangeable
interchangeable cross-reference
interchangeable
S1635-63333Interchangeable
interchangeable cross-reference
interchangeable
S1635-63333-1Interchangeable
interchangeable cross-reference
interchangeable
1560H34-036-3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 53175T?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 53175T?
53175T is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace 53175T?
There are 11 known substitutes for 53175T: K3, 23601-00160, 6131 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 53175T?
53175T is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-836-9611. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 53175T

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026