PartsTable
Technical Data Sheet
Download PDF

5315PL0940202 — PIN,GROOVED,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

5315PL0940202: PIN,GROOVED,HEADED.

The PIN,GROOVED,HEADED is a the manufacturer industrial component. Key specifications include height: 0.062 INCHES NOMINAL IN, diameter: 0.1238 INCHES MINIMUM AND 0.1243 INCHES MAXIMUM IN, material: STEEL COMP 1117 OVERALL, head_style: FLAT CHAMFER, undercut_width: 0.031 INCHES NOMINAL IN, first_end_style: SQUARE. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-035-4756, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5315PL0940202
NSN: 5315-01-035-4756
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
height0.062 INCHES NOMINAL IN
diameter0.1238 INCHES MINIMUM AND 0.1243 INCHES MAXIMUM IN
materialSTEEL COMP 1117 OVERALL
head_styleFLAT CHAMFER
undercut_width0.031 INCHES NOMINAL IN
first_end_styleSQUARE
style_designatorGROOVE
features_providedCASEHARDENED
pin_head_diameter0.250 INCHES NOMINAL IN
surface_treatmentOXIDE FILM OVERALL
under_head_length0.453 INCHES NOMINAL IN
undercut_diameter0.110 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
NSN5315-01-035-4756
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 5315PL0940202 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
UNDERCUT WIDTH: 0.031 INCHES NOMINAL IN
•
UNDERCUT DIAMETER: 0.110 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
UNDER HEAD LENGTH: 0.453 INCHES NOMINAL IN
•
FIRST END STYLE: SQUARE
•
FIRST HOLE DIAMETER: 0.070 INCHES NOMINAL IN
•
STYLE DESIGNATOR: GROOVE
•
PIN HEAD DIAMETER: 0.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
UNDERCUT WIDTH0.031 INCHES NOMINAL IN
UNDERCUT DIAMETER0.110 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
HOLE ARRANGEMENT STYLEONE END DRILLED
UNDER HEAD LENGTH0.453 INCHES NOMINAL IN
FIRST END STYLESQUARE
FIRST HOLE DIAMETER0.070 INCHES NOMINAL IN
STYLE DESIGNATORGROOVE
PIN HEAD DIAMETER0.250 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
DIAMETER0.1238 INCHES MINIMUM AND 0.1243 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 5315PL0940202?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5315PL0940202?
5315PL0940202 is a PIN,GROOVED,HEADED.
What is the NSN for 5315PL0940202?
5315PL0940202 is cataloged in the U.S. Government catalog under NSN 5315-01-035-4756. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5315PL0940202

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.