PartsTable
Technical Data Sheet
Download PDF

5315PL0914877 — PIN,STRAIGHT,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

5315PL0914877: PIN,STRAIGHT,HEADLESS.

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, shear_strength: 144000 SINGLE POUNDS PER SQUARE INCH, surface_finish: 32.0 MICROINCHES OUTSIDE DIAMETER, first_end_style: CHAMFERED, hardness_rating: 60.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM OVERALL, second_end_style: RADIUS. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-148-3729, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5315PL0914877
NSN: 5315-01-148-3729
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialSTEEL OVERALL
shear_strength144000 SINGLE POUNDS PER SQUARE INCH
surface_finish32.0 MICROINCHES OUTSIDE DIAMETER
first_end_styleCHAMFERED
hardness_rating60.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM OVERALL
second_end_styleRADIUS
surface_treatmentPHOSPHATE MANGANESE AND LUBRICANT OR OXIDE OVERALL
pin_overall_length0.500 INCHES NOMINAL IN
pin_overall_diameter0.1251 INCHES MINIMUM AND 0.1253 INCHES MAXIMUM IN
first_end_taper_angle5.0 DEGREES MINIMUM AND 10.0 DEGREES MAXIMUM
second_end_corner_radius0.046 INCHES NOMINAL IN
second_end_relationship_with_first_endNOT IDENTICAL
NSN5315-01-148-3729
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 5315PL0914877 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 32.0 MICROINCHES OUTSIDE DIAMETER
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: DOD-P-16232 TYPE M,CLASS 1 MIL SPEC 1ST TREATMENT RESPONSE AND MIL-C-16173 GRADE 4 MIL SPEC 2ND TREATMENT RESPONSE OR MIL-C-13924 CLASS 1 MIL SPEC 3RD TREATMENT RESPONSE OVERALL
•
FIRST END STYLE: CHAMFERED
•
HARDNESS RATING: 60.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM OVERALL
•
FIRST END TAPER ANGLE: 5.0 DEGREES MINIMUM AND 10.0 DEGREES MAXIMUM
•
PIN OVERALL DIAMETER: 0.1251 INCHES MINIMUM AND 0.1253 INCHES MAXIMUM IN
•
PIN OVERALL LENGTH: 0.500 INCHES NOMINAL IN
•
SECOND END RELATIONSHIP WITH FIRST END: NOT IDENTICAL
TECHNICAL CHARACTERISTICS
SURFACE FINISH32.0 MICROINCHES OUTSIDE DIAMETER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONDOD-P-16232 TYPE M,CLASS 1 MIL SPEC 1ST TREATMENT RESPONSE AND MIL-C-16173 GRADE 4 MIL SPEC 2ND TREATMENT RESPONSE OR MIL-C-13924 CLASS 1 MIL SPEC 3RD TREATMENT RESPONSE OVERALL
FIRST END STYLECHAMFERED
HARDNESS RATING60.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM OVERALL
FIRST END TAPER ANGLE5.0 DEGREES MINIMUM AND 10.0 DEGREES MAXIMUM
PIN OVERALL DIAMETER0.1251 INCHES MINIMUM AND 0.1253 INCHES MAXIMUM IN
PIN OVERALL LENGTH0.500 INCHES NOMINAL IN
SECOND END RELATIONSHIP WITH FIRST ENDNOT IDENTICAL
SURFACE TREATMENTPHOSPHATE MANGANESE AND LUBRICANT OR OXIDE OVERALL
SHEAR STRENGTH144000 SINGLE POUNDS PER SQUARE INCH
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5315PL0914877?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5315PL0914877?
5315PL0914877 is a PIN,STRAIGHT,HEADLESS.
What is the NSN for 5315PL0914877?
5315PL0914877 is cataloged in the U.S. Government catalog under NSN 5315-01-148-3729. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5315PL0914877

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.