PartsTable
Technical Data Sheet
Download PDF

5315PL0849713 — PIN,HOLLOW

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

5315PL0849713: PIN,HOLLOW.

The PIN,HOLLOW is a the manufacturer industrial component. Key specifications include material: STEEL COMP 300M OVERALL, inside_diameter: 0.780 INCHES NOMINAL IN, special_features: TWO RAISED LIPS 0.080 IN. HIGH BY 0.220 IN.

WIDE 180 DEGREES APART IN, surface_treatment: CADMIUM OVERALL, pin_overall_length: 3.635 INCHES NOMINAL IN, pin_overall_diameter: 0.9692 INCHES MINIMUM AND 0.9708 INCHES MAXIMUM IN. This part is cataloged in the U.S. Government catalog under NSN 5315-01-275-8484, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5315PL0849713
NSN: 5315-01-275-8484
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialSTEEL COMP 300M OVERALL
inside_diameter0.780 INCHES NOMINAL IN
special_featuresTWO RAISED LIPS 0.080 IN. HIGH BY 0.220 IN. WIDE 180 DEGREES APART IN
surface_treatmentCADMIUM OVERALL
pin_overall_length3.635 INCHES NOMINAL IN
pin_overall_diameter0.9692 INCHES MINIMUM AND 0.9708 INCHES MAXIMUM IN
criticality_code_justificationSUPP
material_document_and_classificationAMS-6257 ASSN STD 1ST MATERIAL RESPONSE OR AMS-6419 ASSN STD 2ND MATERIAL RESPONSE OVERALL
NSN5315-01-275-8484
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 5315PL0849713 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SUPPLEMENTARY FEATURES: ITEM IS NOT CSI BUT HAS CRITICAL FEATURES SUCH AS HEAT TREATMENT,SURFACE FINISH,OR MATERIAL TYPE AND SPECIAL INSPECTION REQUIREMENTS SUCH AS MAGNETIC PARTICLE INSPECTION OR FLUORESCENT PENETRANT INSPECTION
•
CRITICALITY CODE JUSTIFICATION: SUPP
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS-6257 ASSN STD 1ST MATERIAL RESPONSE OR AMS-6419 ASSN STD 2ND MATERIAL RESPONSE OVERALL
•
PIN OVERALL DIAMETER: 0.9692 INCHES MINIMUM AND 0.9708 INCHES MAXIMUM IN
•
PIN OVERALL LENGTH: 3.635 INCHES NOMINAL IN
•
INSIDE DIAMETER: 0.780 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OVERALL
TECHNICAL CHARACTERISTICS
SUPPLEMENTARY FEATURESITEM IS NOT CSI BUT HAS CRITICAL FEATURES SUCH AS HEAT TREATMENT,SURFACE FINISH,OR MATERIAL TYPE AND SPECIAL INSPECTION REQUIREMENTS SUCH AS MAGNETIC PARTICLE INSPECTION OR FLUORESCENT PENETRANT INSPECTION
CRITICALITY CODE JUSTIFICATIONSUPP
MATERIAL DOCUMENT AND CLASSIFICATIONAMS-6257 ASSN STD 1ST MATERIAL RESPONSE OR AMS-6419 ASSN STD 2ND MATERIAL RESPONSE OVERALL
PIN OVERALL DIAMETER0.9692 INCHES MINIMUM AND 0.9708 INCHES MAXIMUM IN
PIN OVERALL LENGTH3.635 INCHES NOMINAL IN
INSIDE DIAMETER0.780 INCHES NOMINAL IN
SPECIAL FEATURESTWO RAISED LIPS 0.080 IN. HIGH BY 0.220 IN. WIDE 180 DEGREES APART IN
SURFACE TREATMENTCADMIUM OVERALL
MATERIALSTEEL COMP 300M OVERALL
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 1
2007405-35Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 5315PL0849713?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5315PL0849713?
5315PL0849713 is a PIN,HOLLOW.
What parts can replace 5315PL0849713?
There is 1 known substitute for 5315PL0849713: 2007405-35. Substitute compatibility should be verified for your specific system.
What is the NSN for 5315PL0849713?
5315PL0849713 is cataloged in the U.S. Government catalog under NSN 5315-01-275-8484. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5315PL0849713

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.