PartsTable
Technical Data Sheet
Download PDF

5315PL0246109 — PIN,COTTER

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

5315PL0246109: PIN,COTTER.

The PIN,COTTER is a the manufacturer industrial component. Key specifications include diameter: 0.146 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN, material: STEEL OVERALL, point_type: EXTENDED PRONG SQUARE CUT, special_features: INCUT 0.133 LOWER PRONG, style_designator: STANDARD, underloop_length: 1.070 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-137-5004, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5315PL0246109
NSN: 5315-01-137-5004
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
diameter0.146 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
materialSTEEL OVERALL
point_typeEXTENDED PRONG SQUARE CUT
special_featuresINCUT 0.133 LOWER PRONG
style_designatorSTANDARD
underloop_length1.070 INCHES NOMINAL IN
surface_treatmentZINC OVERALL
NSN5315-01-137-5004
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 5315PL0246109 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: STANDARD
•
DIAMETER: 0.146 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
•
SURFACE TREATMENT: ZINC OVERALL
•
UNDERLOOP LENGTH: 1.070 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
POINT TYPE: EXTENDED PRONG SQUARE CUT
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSTANDARD
DIAMETER0.146 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
SPECIAL FEATURESINCUT 0.133 LOWER PRONG
SURFACE TREATMENTZINC OVERALL
UNDERLOOP LENGTH1.070 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
POINT TYPEEXTENDED PRONG SQUARE CUT
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5315PL0246109?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5315PL0246109?
5315PL0246109 is a PIN,COTTER.
What is the NSN for 5315PL0246109?
5315PL0246109 is cataloged in the U.S. Government catalog under NSN 5315-01-137-5004. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5315PL0246109

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.