The Pin,grooved,headless, cataloged under National Stock Number 5315-00-735-7787, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. The manufacturer of record is U S Army Tank Automotive Command Amsta-Im-Mm. Government technical data includes 15 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-00-735-7787 |
| Primary Part Number | 7357787 |
| Item Name | Pin,grooved,headless |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Manufacturer | U S Army Tank Automotive Command Amsta-Im-Mm |
| Status | ACTIVE |
| Surface Finish | 63.0 MICROINCHES OUTSIDE DIAMETER |
| Undercut Width | 0.053 INCHES MINIMUM AND 0.058 INCHES MAXIMUM IN |
| First End Taper Length | 0.016 INCHES NOMINAL IN |
| Undercut Diameter | 0.108 INCHES MINIMUM AND 0.113 INCHES MAXIMUM IN |
| First End Location | BOTH ENDS |
| Surface Treatment Document and Classification | QQ-P-416 TYPE 2 CLASS 3 FED SPEC 1ST TREATMENT RESPONSE OVERALL |
| First End Style | CHAMFERED |
| Style Designator | GROOVE |
| Material Document and Classification | QQ-W-4-5 FED SPEC ALL MATERIAL RESPONSES OVERALL |
| Diameter | 0.151 INCHES MINIMUM AND 0.154 INCHES MAXIMUM IN |
| First End Taper Angle | 45.0 DEGREES NOMINAL |
| Second End Relationship with First End | IDENTICAL |
| Effective Length | 0.375 INCHES NOMINAL IN |
| Surface Treatment | CADMIUM AND PHOSPHATE OR ZINC AND CHROMATE OVERALL |
| Material | STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1022 OR STEEL COMP 1024 OR STEEL COMP 1025 OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 7357787 PRIMARY | U S Army Tank Automotive Command Amsta-Im-Mm (USA) |
| Reference | Meaning |
|---|---|
| 7357787 | 5/9 Secondary reference Feinmechanische Werke Mainz Gmbh |
| 5315007357787 | 5/9 Secondary reference E.c.a Etablissement Centrald'approvisionnement Des Forces Armee |
| 10502278 | 6/9 Informative reference only Nimikkeistokeskus Ncb Finland |
| 7357787 | 5/9 Secondary reference Liebherr-Aerospace Lindenberg Gmbh |
NSN 5315-00-735-7787 is a Pin,grooved,headless, manufactured by U S Army Tank Automotive Command Amsta-Im-Mm, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
NSN 5315-00-735-7787 has 1 manufacturer part number on file: 7357787 (U S Army Tank Automotive Command Amsta-Im-Mm).
Key specifications for 7357787: Surface Finish: 63.0 MICROINCHES OUTSIDE DIAMETER; Undercut Width: 0.053 INCHES MINIMUM AND 0.058 INCHES MAXIMUM IN; First End Taper Length: 0.016 INCHES NOMINAL IN; Undercut Diameter: 0.108 INCHES MINIMUM AND 0.113 INCHES MAXIMUM IN. 15 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.