PartsTable TECHNICAL DATA SHEET
NSN 5315-00-494-9551Government record, cited

Pin, Grooved, Headed5315-00-494-9551

NSN 5315-00-494-9551 · NIIN 004949551 · Part number 10225475
Us Army Aviation and Missile Command · FSC 5315 — Nails, Machine Keys, and Pins · FSG 53 — Hardware and Abrasives · CAGE 18876
Government record, cited
NSN 5315-00-494-9551 — this item is cataloged by the U.S. Government under National Stock Number 5315-00-494-9551. Manufacturer of record part number: 10225475.
Also searched as  5315-00-494-9551 · 5315004949551 · NIIN 004949551 · 00-494-9551 · FSC 5315 Nails, Machine Keys, and Pins · CAGE 18876 · 10225475 · 457-5624 · 5315004949551
Nearby stock numbers  ·
Features
  • Pin,grooved,headed — FSC 5315
  • Surface Finish: 32.0 MICROINCHES OUTSIDE DIAMETER
  • Surface Finish: 125.0 MICROINCHES ALL OTHER SURFACES
  • Undercut Width: 0.029 INCHES MINIMUM AND 0.032 INCHES MAXIMUM IN
  • First End Taper Length: 0.010 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN
  • Undercut Diameter: 0.288 INCHES MINIMUM AND 0.292 INCHES MAXIMUM IN
  • Surface Treatment Document and Classification: MIL-C-14538 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
  • Under Head Length: 1.290 INCHES MINIMUM AND 1.300 INCHES MAXIMUM IN
Identification
  • NSN: 5315-00-494-9551
  • NIIN: 004949551
  • FSC: 5315 — Nails, Machine Keys, and Pins
  • FSG: 53 — Hardware and Abrasives
  • Primary part number: 10225475
  • Manufacturer: Us Army Aviation and Missile Command
General Description

The Pin,grooved,headed, cataloged under National Stock Number 5315-00-494-9551, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. The manufacturer of record is Us Army Aviation and Missile Command. Government technical data includes 18 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5315-00-494-9551
Primary Part Number10225475
Item NamePin,grooved,headed
FSC / FSG5315 / 53 — Nails, Machine Keys, and Pins
ManufacturerUs Army Aviation and Missile Command
StatusACTIVE
Surface Finish32.0 MICROINCHES OUTSIDE DIAMETER
Surface Finish125.0 MICROINCHES ALL OTHER SURFACES
Undercut Width0.029 INCHES MINIMUM AND 0.032 INCHES MAXIMUM IN
First End Taper Length0.010 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN
Undercut Diameter0.288 INCHES MINIMUM AND 0.292 INCHES MAXIMUM IN
Surface Treatment Document and ClassificationMIL-C-14538 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
Under Head Length1.290 INCHES MINIMUM AND 1.300 INCHES MAXIMUM IN
First End StyleCHAMFERED
Style DesignatorGROOVE
Pin Head Diameter0.437 INCHES NOMINAL IN
Material Document and ClassificationAMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
Diameter0.309 INCHES MINIMUM AND 0.311 INCHES MAXIMUM IN
First End Taper Angle45.0 DEGREES NOMINAL
Effective Length1.219 INCHES MINIMUM AND 1.232 INCHES MAXIMUM IN
Head StyleFLAT CHAMFER
Height0.062 INCHES NOMINAL IN
Surface TreatmentCHROMIUM OVERALL
MaterialSTEEL COMP 630 OVERALL
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
10225475 PRIMARY Us Army Aviation and Missile Command (USA)
Reference documents
ReferenceMeaning
457-5624 6/9 Informative reference only
Nimikkeistokeskus Ncb Finland
5315004949551 6/9 Informative reference only
E.c.a Etablissement Central Des Approvisionnements Des Forces Armees Royales
No interchangeability data on file.
Other items in FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037
5315-00-000-1037 · Item name not on file
5315-00-000-1067
5315-00-000-1067 · Item name not on file
5315-00-000-1245
5315-00-000-1245 · Item name not on file
5315-00-000-1372
5315-00-000-1372 · Item name not on file
5315-00-000-1412
5315-00-000-1412 · Item name not on file
5315-00-001-1571
PIN
5315-00-001-1572
PIN,LINKAGE
5315-00-001-1602
5315-00-001-1602 · Item name not on file

Frequently Asked Questions

What is NSN 5315-00-494-9551?

NSN 5315-00-494-9551 is a Pin,grooved,headed, manufactured by Us Army Aviation and Missile Command, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.

What part numbers are listed for NSN 5315-00-494-9551?

NSN 5315-00-494-9551 has 1 manufacturer part number on file: 10225475 (Us Army Aviation and Missile Command).

What are the specifications of 10225475?

Key specifications for 10225475: Surface Finish: 32.0 MICROINCHES OUTSIDE DIAMETER; Surface Finish: 125.0 MICROINCHES ALL OTHER SURFACES; Undercut Width: 0.029 INCHES MINIMUM AND 0.032 INCHES MAXIMUM IN; First End Taper Length: 0.010 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN. 18 specifications are documented in the U.S. Government catalog.

Is NSN 5315-00-494-9551 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com