PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5315004250118
5315004250118 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, first_end_style: CHAMFERED, pin_overall_length: 7.305 INCHES NOMINAL IN, pin_overall_diameter: 0.6250 INCHES NOMINAL IN, first_end_taper_angle: 30.0 DEGREES NOMINAL, first_end_taper_length: 0.062 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-425-0118, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5315004250118
NSN: 5315-00-425-0118
FSC: 5315
CAGE: A00AM — E.C.A ETABLISSEMENT CENTRAL DES APPROVISIONNEMENTS DES FORCES ARMEES ROYALES
SPECIFICATIONS
materialSTEEL OVERALL
first_end_styleCHAMFERED
pin_overall_length7.305 INCHES NOMINAL IN
pin_overall_diameter0.6250 INCHES NOMINAL IN
first_end_taper_angle30.0 DEGREES NOMINAL
first_end_taper_length0.062 INCHES NOMINAL IN
second_end_relationship_with_first_endIDENTICAL
NSN5315-00-425-0118
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 5315004250118 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
FIRST END TAPER LENGTH: 0.062 INCHES NOMINAL IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
PIN OVERALL LENGTH: 7.305 INCHES NOMINAL IN
•
FIRST END TAPER ANGLE: 30.0 DEGREES NOMINAL
•
PIN OVERALL DIAMETER: 0.6250 INCHES NOMINAL IN
•
FIRST END STYLE: CHAMFERED
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
FIRST END TAPER LENGTH0.062 INCHES NOMINAL IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
PIN OVERALL LENGTH7.305 INCHES NOMINAL IN
FIRST END TAPER ANGLE30.0 DEGREES NOMINAL
PIN OVERALL DIAMETER0.6250 INCHES NOMINAL IN
FIRST END STYLECHAMFERED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
98-1790Interchangeable
interchangeable cross-reference
interchangeable
11-132Interchangeable
interchangeable cross-reference
interchangeable
18-0967Interchangeable
interchangeable cross-reference
interchangeable
164164Interchangeable
interchangeable cross-reference
interchangeable
E-161909 PIECE 6Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5315004250118?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5315004250118?
5315004250118 is a PIN,STRAIGHT,HEADLESS.
What parts can replace 5315004250118?
There are 5 known substitutes for 5315004250118: 98-1790, 11-132, 18-0967 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5315004250118?
5315004250118 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-425-0118. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5315004250118

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026