PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5315000820448
5315000820448 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,SHOULDER,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, shank_length: 0.385 INCHES NOMINAL IN, overall_length: 1.363 INCHES NOMINAL IN, shank_diameter: 0.080 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN, first_end_style: CHAMFERED, style_designator: SHOULDER. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-082-0448, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5315000820448
NSN: 5315-00-082-0448
FSC: 5315
CAGE: A00AM — E.C.A ETABLISSEMENT CENTRAL DES APPROVISIONNEMENTS DES FORCES ARMEES ROYALES
SPECIFICATIONS
materialSTEEL OVERALL
shank_length0.385 INCHES NOMINAL IN
overall_length1.363 INCHES NOMINAL IN
shank_diameter0.080 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
first_end_styleCHAMFERED
style_designatorSHOULDER
features_providedCASEHARDENED
shoulder_diameter0.245 INCHES NOMINAL IN
first_end_locationBOTH ENDS
second_shank_length0.385 INCHES NOMINAL IN
first_end_taper_angle45.0 DEGREES NOMINAL
second_shank_diameter0.080 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
NSN5315-00-082-0448
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 5315000820448 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER ANGLE: 45.0 DEGREES NOMINAL
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
SECOND SHANK LENGTH: 0.385 INCHES NOMINAL IN
•
SECOND SHANK DIAMETER: 0.080 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
•
SHANK LENGTH: 0.385 INCHES NOMINAL IN
•
SHANK DIAMETER: 0.080 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
•
FIRST END STYLE: CHAMFERED
•
FIRST END TAPER LENGTH: 0.015 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
SECOND SHANK LENGTH0.385 INCHES NOMINAL IN
SECOND SHANK DIAMETER0.080 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
SHANK LENGTH0.385 INCHES NOMINAL IN
SHANK DIAMETER0.080 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
FIRST END STYLECHAMFERED
FIRST END TAPER LENGTH0.015 INCHES NOMINAL IN
FEATURES PROVIDEDCASEHARDENED
STYLE DESIGNATORSHOULDER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
29U060Interchangeable
interchangeable cross-reference
interchangeable
52NU066Interchangeable
interchangeable cross-reference
interchangeable
144178Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5315000820448?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5315000820448?
5315000820448 is a PIN,SHOULDER,HEADLESS.
What parts can replace 5315000820448?
There are 3 known substitutes for 5315000820448: 29U060, 52NU066, 144178. Substitute compatibility should be verified for your specific system.
What is the NSN for 5315000820448?
5315000820448 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-082-0448. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5315000820448

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026