PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5315-7-2A2-00
5315-7-2A2-00 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,TOGGLE,EYE COLLAR is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY 464 OVERALL, shank_length: 1.969 INCHES MINIMUM AND 2.031 INCHES MAXIMUM IN, shank_diameter: 0.359 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN, style_designator: EYE COLLAR, eye_inside_diameter: 0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN, eye_stock_thickness: 0.172 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-222-2107, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5315-7-2A2-00
NSN: 5315-00-222-2107
FSC: 5315
CAGE: 14153 — DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA (USA)
SPECIFICATIONS
materialCOPPER ALLOY 464 OVERALL
shank_length1.969 INCHES MINIMUM AND 2.031 INCHES MAXIMUM IN
shank_diameter0.359 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
style_designatorEYE COLLAR
eye_inside_diameter0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
eye_stock_thickness0.172 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN
collar_outside_diameter1.594 INCHES MINIMUM AND 1.656 INCHES MAXIMUM IN
NSN5315-00-222-2107
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 5315-7-2A2-00 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
EYE STOCK THICKNESS: 0.172 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: EYE COLLAR
•
SHANK DIAMETER: 0.359 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
•
SHANK LENGTH: 1.969 INCHES MINIMUM AND 2.031 INCHES MAXIMUM IN
•
COLLAR OUTSIDE DIAMETER: 1.594 INCHES MINIMUM AND 1.656 INCHES MAXIMUM IN
•
MATERIAL: COPPER ALLOY 464 OVERALL
•
EYE INSIDE DIAMETER: 0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
EYE STOCK THICKNESS0.172 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN
STYLE DESIGNATOREYE COLLAR
SHANK DIAMETER0.359 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
SHANK LENGTH1.969 INCHES MINIMUM AND 2.031 INCHES MAXIMUM IN
COLLAR OUTSIDE DIAMETER1.594 INCHES MINIMUM AND 1.656 INCHES MAXIMUM IN
MATERIALCOPPER ALLOY 464 OVERALL
EYE INSIDE DIAMETER0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
43-8Interchangeable
interchangeable cross-reference
interchangeable
5315-7-2B2-00Interchangeable
interchangeable cross-reference
interchangeable
5315-7-2B1-50Interchangeable
interchangeable cross-reference
interchangeable
43-1AND43-3Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5315-7-2A2-00?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5315-7-2A2-00?
5315-7-2A2-00 is a PIN,TOGGLE,EYE COLLAR.
What parts can replace 5315-7-2A2-00?
There are 4 known substitutes for 5315-7-2A2-00: 43-8, 5315-7-2B2-00, 5315-7-2B1-50 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5315-7-2A2-00?
5315-7-2A2-00 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-222-2107. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5315-7-2A2-00

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026