PartsTable
Technical Data Sheet
Download PDF

5315-500-2202 — PIN,STRAIGHT,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

5315-500-2202: PIN,STRAIGHT,HEADLESS.

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, first_end_style: CHAMFERED, hardness_rating: 25.0 ROCKWELL C MINIMUM AND 30.0 ROCKWELL C MAXIMUM OVERALL, surface_treatment: PHOSPHATE MANGANESE OR PHOSPHATE ZINC OVERALL, pin_overall_length: 3.844 INCHES MINIMUM AND 3.906 INCHES MAXIMUM IN, first_hole_diameter: 0.203 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-500-2202, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5315-500-2202
NSN: 5315-00-500-2202
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: A00AM — E.C.A ETABLISSEMENT CENTRAL DES APPROVISIONNEMENTS DES FORCES ARMEES ROYALES
SPECIFICATIONS
materialSTEEL OVERALL
first_end_styleCHAMFERED
hardness_rating25.0 ROCKWELL C MINIMUM AND 30.0 ROCKWELL C MAXIMUM OVERALL
surface_treatmentPHOSPHATE MANGANESE OR PHOSPHATE ZINC OVERALL
pin_overall_length3.844 INCHES MINIMUM AND 3.906 INCHES MAXIMUM IN
first_hole_diameter0.203 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN
pin_overall_diameter1.1780 INCHES MINIMUM AND 1.1800 INCHES MAXIMUM IN
second_hole_diameter0.203 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN
first_end_taper_angle43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM
first_end_taper_length0.031 INCHES MINIMUM AND 0.094 INCHES MAXIMUM IN
hole_arrangement_styleBOTH END DRILLED
second_end_relationship_with_first_endIDENTICAL
NSN5315-00-500-2202
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 5315-500-2202 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER LENGTH: 0.031 INCHES MINIMUM AND 0.094 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-P-16232,TY M CL 1 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-P-16232,TY Z CL 1 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
•
HOLE ARRANGEMENT STYLE: BOTH END DRILLED
•
FIRST END STYLE: CHAMFERED
•
FIRST HOLE DIAMETER: 0.203 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN
•
HARDNESS RATING: 25.0 ROCKWELL C MINIMUM AND 30.0 ROCKWELL C MAXIMUM OVERALL
•
FIRST END TAPER ANGLE: 43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM
•
PIN OVERALL DIAMETER: 1.1780 INCHES MINIMUM AND 1.1800 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
FIRST END TAPER LENGTH0.031 INCHES MINIMUM AND 0.094 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-P-16232,TY M CL 1 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-P-16232,TY Z CL 1 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
HOLE ARRANGEMENT STYLEBOTH END DRILLED
FIRST END STYLECHAMFERED
FIRST HOLE DIAMETER0.203 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN
HARDNESS RATING25.0 ROCKWELL C MINIMUM AND 30.0 ROCKWELL C MAXIMUM OVERALL
FIRST END TAPER ANGLE43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM
PIN OVERALL DIAMETER1.1780 INCHES MINIMUM AND 1.1800 INCHES MAXIMUM IN
PIN OVERALL LENGTH3.844 INCHES MINIMUM AND 3.906 INCHES MAXIMUM IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
SUBSTITUTES & CROSS-REFERENCES 1
5315005002202Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5315-500-2202?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5315-500-2202?
5315-500-2202 is a PIN,STRAIGHT,HEADLESS.
What parts can replace 5315-500-2202?
There is 1 known substitute for 5315-500-2202: 5315005002202. Substitute compatibility should be verified for your specific system.
What is the NSN for 5315-500-2202?
5315-500-2202 is cataloged in the U.S. Government catalog under NSN 5315-00-500-2202. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5315-500-2202

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.