PartsTable
Technical Data Sheet
Download PDF

5315-050-5085 — PIN,STRAIGHT,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

5315-050-5085: PIN,STRAIGHT,HEADLESS.

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1117 OR STEEL COMP 1118 OVERALL, first_end_style: CHAMFERED, pin_overall_length: 2.968 INCHES MINIMUM AND 2.978 INCHES MAXIMUM IN, first_hole_diameter: 0.107 INCHES NOMINAL IN, pin_overall_diameter: 0.3720 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN, second_hole_diameter: 0.107 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-050-5085, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5315-050-5085
NSN: 5315-00-050-5085
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: A00AM — E.C.A ETABLISSEMENT CENTRAL DES APPROVISIONNEMENTS DES FORCES ARMEES ROYALES
SPECIFICATIONS
materialSTEEL COMP 1117 OR STEEL COMP 1118 OVERALL
first_end_styleCHAMFERED
pin_overall_length2.968 INCHES MINIMUM AND 2.978 INCHES MAXIMUM IN
first_hole_diameter0.107 INCHES NOMINAL IN
pin_overall_diameter0.3720 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN
second_hole_diameter0.107 INCHES NOMINAL IN
first_end_taper_angle15.0 DEGREES NOMINAL
first_end_taper_length0.078 INCHES NOMINAL IN
hole_arrangement_styleBOTH END DRILLED
material_document_and_classificationQQ-S-633 FED SPEC ALL MATERIAL RESPONSES OVERALL
second_end_relationship_with_first_endIDENTICAL
center_to_center_distance_between_holes2.657 INCHES NOMINAL IN
NSN5315-00-050-5085
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 5315-050-5085 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER LENGTH: 0.078 INCHES NOMINAL IN
•
HOLE ARRANGEMENT STYLE: BOTH END DRILLED
•
FIRST END STYLE: CHAMFERED
•
FIRST HOLE DIAMETER: 0.107 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633 FED SPEC ALL MATERIAL RESPONSES OVERALL
•
FIRST END TAPER ANGLE: 15.0 DEGREES NOMINAL
•
PIN OVERALL DIAMETER: 0.3720 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN
•
PIN OVERALL LENGTH: 2.968 INCHES MINIMUM AND 2.978 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
FIRST END TAPER LENGTH0.078 INCHES NOMINAL IN
HOLE ARRANGEMENT STYLEBOTH END DRILLED
FIRST END STYLECHAMFERED
FIRST HOLE DIAMETER0.107 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-633 FED SPEC ALL MATERIAL RESPONSES OVERALL
FIRST END TAPER ANGLE15.0 DEGREES NOMINAL
PIN OVERALL DIAMETER0.3720 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM IN
PIN OVERALL LENGTH2.968 INCHES MINIMUM AND 2.978 INCHES MAXIMUM IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
SECOND HOLE DIAMETER0.107 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
505085Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5315-050-5085?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5315-050-5085?
5315-050-5085 is a PIN,STRAIGHT,HEADLESS.
What parts can replace 5315-050-5085?
There is 1 known substitute for 5315-050-5085: 505085. Substitute compatibility should be verified for your specific system.
What is the NSN for 5315-050-5085?
5315-050-5085 is cataloged in the U.S. Government catalog under NSN 5315-00-050-5085. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5315-050-5085

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.