The Pin,straight,headed, cataloged under National Stock Number 5315-01-580-7570, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 14 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-01-580-7570 |
| Item Name | Pin,straight,headed |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| Chamfer Length | 0.006 INCHES MINIMUM AND 0.026 INCHES MAXIMUM IN |
| Hole Arrangement Style | ONE END DRILLED |
| Under Head Length | 0.766 INCHES MINIMUM AND 0.786 INCHES MAXIMUM IN |
| Pin Chamfer Angle | 40.0 DEGREES MINIMUM AND 45.0 DEGREES MAXIMUM |
| First Hole Diameter | 0.073 INCHES MINIMUM AND 0.088 INCHES MAXIMUM IN |
| Style Designator | STRAIGHT |
| Pin Head Diameter | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN |
| Material Document and Classification | MS35810B CARBON STEEL,TYPE I,CYANIDE HARDENED MIL STD ALL MATERIAL RESPONSES OVERALL |
| Diameter | 0.243 INCHES MINIMUM AND 0.249 INCHES MAXIMUM IN |
| Head Style | FLAT CHAMFER |
| Height | 0.084 INCHES MINIMUM AND 0.104 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM OR ZINC OVERALL |
| Material | STEEL OVERALL |
| Distance From Centerline of Hole to End of Pin | 0.094 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS35810-12 | 2/2 Government specification standardization U.S. Government activity |
NSN 5315-01-580-7570 is a Pin,straight,headed, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
Key specifications for 5315-01-580-7570: Chamfer Length: 0.006 INCHES MINIMUM AND 0.026 INCHES MAXIMUM IN; Hole Arrangement Style: ONE END DRILLED; Under Head Length: 0.766 INCHES MINIMUM AND 0.786 INCHES MAXIMUM IN; Pin Chamfer Angle: 40.0 DEGREES MINIMUM AND 45.0 DEGREES MAXIMUM. 14 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.