The Pin,straight,headed, cataloged under National Stock Number 5315-01-498-0297, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. The manufacturer of record is Penn Engineering & Manufacturing Corp. Government technical data includes 9 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-01-498-0297 |
| Primary Part Number | TPS-250-8 |
| Item Name | Pin,straight,headed |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Manufacturer | Penn Engineering & Manufacturing Corp |
| Status | ACTIVE |
| Under Head Length | 0.410 INCHES NOMINAL IN |
| Pin Chamfer Angle | 59.0 DEGREES MINIMUM AND 69.0 DEGREES MAXIMUM |
| Style Designator | STRAIGHT |
| Pin Head Diameter | 0.283 INCHES MINIMUM AND 0.287 INCHES MAXIMUM IN |
| Diameter | 0.248 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN |
| Head Style | FLUSH |
| Height | 0.090 INCHES MAXIMUM IN |
| Surface Treatment | PASSIVATE OVERALL |
| Material | STEEL CORROSION RESISTING OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| TPS-250-8 PRIMARY | Penn Engineering & Manufacturing Corp (USA) |
| Reference | Meaning |
|---|---|
| 13041531 | 7/2 Vendor item drawing reference Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate |
NSN 5315-01-498-0297 is a Pin,straight,headed, manufactured by Penn Engineering & Manufacturing Corp, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
NSN 5315-01-498-0297 has 1 manufacturer part number on file: TPS-250-8 (Penn Engineering & Manufacturing Corp).
Key specifications for TPS-250-8: Under Head Length: 0.410 INCHES NOMINAL IN; Pin Chamfer Angle: 59.0 DEGREES MINIMUM AND 69.0 DEGREES MAXIMUM; Style Designator: STRAIGHT; Pin Head Diameter: 0.283 INCHES MINIMUM AND 0.287 INCHES MAXIMUM IN. 9 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.