The Pin,grooved,headed, cataloged under National Stock Number 5315-01-488-5008, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-01-488-5008 |
| Item Name | Pin,grooved,headed |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| Undercut Width | 0.040 INCHES MINIMUM AND 0.043 INCHES MAXIMUM IN |
| First End Taper Length | 0.030 INCHES NOMINAL IN |
| Undercut Diameter | 0.585 INCHES MINIMUM AND 0.591 INCHES MAXIMUM IN |
| Hole Arrangement Style | ONE END DRILLED |
| Under Head Length | 2.250 INCHES NOMINAL IN |
| First End Style | CHAMFERED |
| First Hole Diameter | 0.125 INCHES MINIMUM AND 0.129 INCHES MAXIMUM IN |
| Style Designator | GROOVE |
| Pin Head Diameter | 1.000 INCHES NOMINAL IN |
| Material Document and Classification | ASTM A322 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A331 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 6415 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Diameter | 0.625 INCHES MINIMUM AND 0.626 INCHES MAXIMUM IN |
| First End Taper Angle | 45.0 DEGREES NOMINAL |
| Effective Length | 2.050 INCHES NOMINAL IN |
| Head Style | FLAT CHAMFER |
| Second Undercut Width | 0.125 INCHES NOMINAL IN |
| Height | 0.250 INCHES NOMINAL IN |
| Second Undercut Diameter | 0.500 INCHES NOMINAL IN |
| Material | STEEL COMP 4340 OVERALL |
| Distance From Centerline of Hole to End of Pin | 0.313 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 4D10651-001 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5315-01-488-5008 is a Pin,grooved,headed, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
Key specifications for 5315-01-488-5008: Undercut Width: 0.040 INCHES MINIMUM AND 0.043 INCHES MAXIMUM IN; First End Taper Length: 0.030 INCHES NOMINAL IN; Undercut Diameter: 0.585 INCHES MINIMUM AND 0.591 INCHES MAXIMUM IN; Hole Arrangement Style: ONE END DRILLED. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.