The Pin,straight,headless, cataloged under National Stock Number 5315-01-486-0951, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 11 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-01-486-0951 |
| Item Name | Pin,straight,headless |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| First End Taper Length | 1.5 MILLIMETERS MAXIMUM MM |
| First End Style | CHAMFERED |
| First End Taper Angle | 20.0 DEGREES NOMINAL |
| Pin Overall Diameter | 6.00 MILLIMETERS MINIMUM AND 6.01 MILLIMETERS MAXIMUM MM |
| Pin Overall Length | 40.0 MILLIMETERS NOMINAL MM |
| Second End Relationship with First End | NOT IDENTICAL |
| Second End Outer Radius | 0.9 MILLIMETERS MAXIMUM MM |
| Surface Treatment | PHOSPHATE OVERALL |
| Second End Style | OVAL |
| Test Data Document | 81349-DOD-P-63478 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Material | STEEL OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| DOD-P-643478/1 | 4/1 Identification reference U.S. Government activity |
| D63478/1-164P | 2/2 Government specification standardization U.S. Government activity |
NSN 5315-01-486-0951 is a Pin,straight,headless, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
Key specifications for 5315-01-486-0951: First End Taper Length: 1.5 MILLIMETERS MAXIMUM MM; First End Style: CHAMFERED; First End Taper Angle: 20.0 DEGREES NOMINAL; Pin Overall Diameter: 6.00 MILLIMETERS MINIMUM AND 6.01 MILLIMETERS MAXIMUM MM. 11 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.