The Pin,shoulder,headless, cataloged under National Stock Number 5315-01-483-1850, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. The manufacturer of record is Naval Sea Systems Command. Government technical data includes 15 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-01-483-1850 |
| Primary Part Number | 7108961 |
| Item Name | Pin,shoulder,headless |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Manufacturer | Naval Sea Systems Command |
| Status | ACTIVE |
| Shank Diameter | 0.248 INCHES MINIMUM AND 0.249 INCHES MAXIMUM IN |
| Undercut Width | 0.590 INCHES NOMINAL IN |
| First End Taper Length | 0.030 INCHES NOMINAL IN |
| Undercut Diameter | 0.150 INCHES MINIMUM AND 0.160 INCHES MAXIMUM IN |
| First End Location | BOTH ENDS |
| Surface Treatment Document and Classification | MIL-C-13924, CL 4 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| First End Style | CHAMFERED |
| Shank Length | 0.960 INCHES NOMINAL IN |
| Style Designator | UNDERCUT |
| Material Document and Classification | MIL-S-867, CL I OR II MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| First End Taper Angle | 45.0 DEGREES NOMINAL |
| Second End Relationship with First End | IDENTICAL |
| Shoulder Diameter | 0.248 INCHES MINIMUM AND 0.249 INCHES MAXIMUM IN |
| Surface Treatment | OXIDE OVERALL |
| Material | STEEL COMP 304 AND STEEL COMP 316 OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 7108961 PRIMARY | Naval Sea Systems Command (USA) |
NSN 5315-01-483-1850 is a Pin,shoulder,headless, manufactured by Naval Sea Systems Command, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
NSN 5315-01-483-1850 has 1 manufacturer part number on file: 7108961 (Naval Sea Systems Command).
Key specifications for 7108961: Shank Diameter: 0.248 INCHES MINIMUM AND 0.249 INCHES MAXIMUM IN; Undercut Width: 0.590 INCHES NOMINAL IN; First End Taper Length: 0.030 INCHES NOMINAL IN; Undercut Diameter: 0.150 INCHES MINIMUM AND 0.160 INCHES MAXIMUM IN. 15 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.