The Pin,straight,headless, cataloged under National Stock Number 5315-01-480-7790, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. The manufacturer of record is Naval Sea Systems Command. Government technical data includes 13 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-01-480-7790 |
| Primary Part Number | 7379216 PC 6 |
| Item Name | Pin,straight,headless |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Manufacturer | Naval Sea Systems Command |
| Status | ACTIVE |
| First End Taper Length | 0.031 INCHES NOMINAL IN |
| Hole Arrangement Style | DRILLED THRU CENTER |
| First End Style | CHAMFERED |
| First Hole Diameter | 0.172 INCHES NOMINAL IN |
| Material Document and Classification | ASTM A 276; COND A ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| First End Taper Angle | 45.0 DEGREES NOMINAL |
| Pin Overall Diameter | 0.4350 INCHES MINIMUM AND 0.4360 INCHES MAXIMUM IN |
| Pin Overall Length | 1.563 INCHES NOMINAL IN |
| Second End Relationship with First End | NOT IDENTICAL |
| Second End Slot Depth | 0.781 INCHES NOMINAL IN |
| Second End Slot Width | 0.047 INCHES NOMINAL IN |
| Second End Style | SLOTTED |
| Material | STEEL COMP 316 OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 7379216 PC 6 PRIMARY | Naval Sea Systems Command (USA) |
NSN 5315-01-480-7790 is a Pin,straight,headless, manufactured by Naval Sea Systems Command, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
NSN 5315-01-480-7790 has 1 manufacturer part number on file: 7379216 PC 6 (Naval Sea Systems Command).
Key specifications for 7379216 PC 6: First End Taper Length: 0.031 INCHES NOMINAL IN; Hole Arrangement Style: DRILLED THRU CENTER; First End Style: CHAMFERED; First Hole Diameter: 0.172 INCHES NOMINAL IN. 13 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.