The Pin,grooved,headless, cataloged under National Stock Number 5315-01-469-5404, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 14 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-01-469-5404 |
| Item Name | Pin,grooved,headless |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| Undercut Width | 0.130 INCHES NOMINAL IN |
| First End Taper Length | 0.120 INCHES NOMINAL IN |
| Undercut Diameter | 0.730 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN |
| First End Location | GROOVED END |
| Second End Taper Angle | 45.0 DEGREES NOMINAL |
| First End Style | CHAMFERED |
| Style Designator | GROOVE |
| Diameter | 0.998 INCHES MINIMUM AND 0.999 INCHES MAXIMUM IN |
| Second End Taper Length | 0.120 INCHES NOMINAL IN |
| First End Taper Angle | 45.0 DEGREES NOMINAL |
| Second End Relationship with First End | NOT IDENTICAL |
| Effective Length | 1.700 INCHES NOMINAL IN |
| Second End Style | CHAMFERED |
| Material | STEEL COMP 630 OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 555-009 | D/9 Drawing number reference only Cpi Satcom & Antenna Technologies Inc. |
| 555-009-001 | 3/9 Design control — primary reference Cpi Satcom & Antenna Technologies Inc. |
NSN 5315-01-469-5404 is a Pin,grooved,headless, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 2530-01-522-2929. Verify interchangeability with system specifications before substitution.
Key specifications for 5315-01-469-5404: Undercut Width: 0.130 INCHES NOMINAL IN; First End Taper Length: 0.120 INCHES NOMINAL IN; Undercut Diameter: 0.730 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN; First End Location: GROOVED END. 14 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.