The Pin,grooved,headless, cataloged under National Stock Number 5315-01-468-7667, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 14 specifications, cited from the U.S. Government catalog. 5 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-01-468-7667 |
| Item Name | Pin,grooved,headless |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| First End Taper Length | 0.047 INCHES MINIMUM IN |
| First End Location | OPPOSITE GROOVED END |
| Surface Treatment Document and Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| First End Style | CHAMFERED |
| Style Designator | FULL LENGTH GROOVE |
| Pin Large End Diameter | 0.515 INCHES MINIMUM AND 0.519 INCHES MAXIMUM IN |
| First End Taper Angle | 30.0 DEGREES MINIMUM AND 45.0 DEGREES MAXIMUM |
| Second End Relationship with First End | NOT IDENTICAL |
| Pin Small End Diameter | 0.4980 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN |
| Pilot Length | 0.094 INCHES NOMINAL IN |
| Surface Treatment | PASSIVATE OVERALL |
| Shear Strength | 90000 SINGLE POUNDS PER SQUARE INCH |
| Second End Style | OVAL |
| Material | STEEL CORROSION RESISTING OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NASM35675 | 5/9 Secondary reference U.S. Government activity |
| MS35675-89 | 5/9 Secondary reference U.S. Government activity |
| MS35675-89 | 3/2 Design control — primary reference U.S. Government activity |
| 15661013 FN 10 | 5/2 Secondary reference U.S. Government activity |
| 15661013 FN 10 | 5/9 Secondary reference Gulf Coast Holdings, Inc Dba Unidynamics |
NSN 5315-01-468-7667 is a Pin,grooved,headless, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
Key specifications for 5315-01-468-7667: First End Taper Length: 0.047 INCHES MINIMUM IN; First End Location: OPPOSITE GROOVED END; Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; First End Style: CHAMFERED. 14 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.