The Pin,shoulder,headed, cataloged under National Stock Number 5315-01-445-5485, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. The manufacturer of record is Naval Sea Systems Command. Government technical data includes 15 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-01-445-5485 |
| Primary Part Number | 6111403-A24 |
| Item Name | Pin,shoulder,headed |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Manufacturer | Naval Sea Systems Command |
| Status | ACTIVE |
| Width Across Flats | 0.300 INCHES NOMINAL IN |
| First End Taper Length | 0.030 INCHES NOMINAL IN |
| First Step Diameter | 0.445 INCHES MINIMUM AND 0.447 INCHES MAXIMUM IN |
| Under Head Length | 5.400 INCHES NOMINAL IN |
| Head Countersink Angle | 45.0 DEGREES NOMINAL |
| First End Style | CHAMFERED |
| Second Step Length | 1.640 INCHES NOMINAL IN |
| Style Designator | SHOULDER |
| First End Taper Angle | 45.0 DEGREES NOMINAL |
| Head Style | HEXAGON COUNTERSUNK |
| Second Step Diameter | 1.109 INCHES NOMINAL IN |
| Height | 0.500 INCHES NOMINAL IN |
| First Step Length | 1.628 INCHES NOMINAL IN |
| Bottom Countersink Diameter | 0.310 INCHES NOMINAL IN |
| Material | NICKEL ALLOY K-500 OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 6111403-A24 PRIMARY | Naval Sea Systems Command (USA) |
NSN 5315-01-445-5485 is a Pin,shoulder,headed, manufactured by Naval Sea Systems Command, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
NSN 5315-01-445-5485 has 1 manufacturer part number on file: 6111403-A24 (Naval Sea Systems Command).
Key specifications for 6111403-A24: Width Across Flats: 0.300 INCHES NOMINAL IN; First End Taper Length: 0.030 INCHES NOMINAL IN; First Step Diameter: 0.445 INCHES MINIMUM AND 0.447 INCHES MAXIMUM IN; Under Head Length: 5.400 INCHES NOMINAL IN. 15 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.