The Pin,grooved,headless, cataloged under National Stock Number 5315-01-406-8061, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. The manufacturer of record is Naval Sea Systems Command. Government technical data includes 15 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-01-406-8061 |
| Primary Part Number | 6098144 |
| Item Name | Pin,grooved,headless |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Manufacturer | Naval Sea Systems Command |
| Status | ACTIVE |
| Undercut Width | 0.029 INCHES MINIMUM AND 0.033 INCHES MAXIMUM IN |
| First End Taper Length | 0.030 INCHES NOMINAL IN |
| Undercut Diameter | 0.410 INCHES MINIMUM AND 0.414 INCHES MAXIMUM IN |
| First End Location | BOTH ENDS |
| Surface Treatment Document and Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| First End Style | CHAMFERED |
| Style Designator | GROOVE |
| Material Document and Classification | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Diameter | 0.4372 INCHES MINIMUM AND 0.4378 INCHES MAXIMUM IN |
| First End Taper Angle | 45.0 DEGREES NOMINAL |
| Second End Relationship with First End | IDENTICAL |
| Effective Length | 1.380 INCHES MINIMUM AND 1.391 INCHES MAXIMUM IN |
| Second Undercut Width | 0.029 INCHES MINIMUM AND 0.033 INCHES MAXIMUM IN |
| Surface Treatment | PASSIVATE OVERALL |
| Material | STEEL COMP 316L OR STEEL COMP 304 OR STEEL COMP 304L OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 6098144 PRIMARY | Naval Sea Systems Command (USA) |
NSN 5315-01-406-8061 is a Pin,grooved,headless, manufactured by Naval Sea Systems Command, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
NSN 5315-01-406-8061 has 1 manufacturer part number on file: 6098144 (Naval Sea Systems Command).
Key specifications for 6098144: Undercut Width: 0.029 INCHES MINIMUM AND 0.033 INCHES MAXIMUM IN; First End Taper Length: 0.030 INCHES NOMINAL IN; Undercut Diameter: 0.410 INCHES MINIMUM AND 0.414 INCHES MAXIMUM IN; First End Location: BOTH ENDS. 15 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.