The Pin,shoulder,headless, cataloged under National Stock Number 5315-01-395-7835, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 20 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-01-395-7835 |
| Item Name | Pin,shoulder,headless |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| Shank Diameter | 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN |
| Second Shank Diameter | 0.309 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN |
| First End Location | THREADED END |
| Second End Taper Angle | 60.0 DEGREES NOMINAL |
| Thread Length | 0.312 INCHES NOMINAL IN |
| First End Style | SQUARE |
| Shank Length | 0.600 INCHES NOMINAL IN |
| Style Designator | SHOULDER |
| Material Document and Classification | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Second End Taper Length | 0.006 INCHES NOMINAL IN |
| Second End Relationship with First End | NOT IDENTICAL |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.250 INCHES IN |
| Second Shank Length | 0.660 INCHES NOMINAL IN |
| Shoulder Width Across Flats | 0.615 INCHES MINIMUM AND 0.627 INCHES MAXIMUM IN |
| Second End Tip Radius | 0.290 INCHES NOMINAL IN |
| Second End Style | CHAMFERED |
| Thread Class | 3 |
| Material | STEEL COMP 630 OVERALL |
| Thread Series Designator | UNF |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 5091764 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5315-01-395-7835 is a Pin,shoulder,headless, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
Key specifications for 5315-01-395-7835: Shank Diameter: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN; Second Shank Diameter: 0.309 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN; First End Location: THREADED END; Second End Taper Angle: 60.0 DEGREES NOMINAL. 20 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.