The Pin,grooved,headless, cataloged under National Stock Number 5315-01-382-4505, is classified within Federal Supply Class 5315 (No Item Name Available) of the Hardware and Abrasives group. The primary manufacturer of record is Sauer-Danfoss /hillsboro/ Co. Government technical data includes 12 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 1 commercial cross-reference from 1 manufacturer, enabling identification through both NSN and commercial part number lookups. 5 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-01-382-4505 |
| Primary Part Number | 57012 |
| Item Name | Pin,grooved,headless |
| FSC / FSG | 5315 / 53 — No Item Name Available |
| Manufacturer | Sauer-Danfoss /hillsboro/ Co |
| Status | ACTIVE |
| First End Taper Angle | 45.0 DEGREES NOMINAL |
| Material | STEEL CORROSION RESISTING OVERALL |
| Second Undercut Width | 0.750 MILLIMETERS MINIMUM AND 0.850 MILLIMETERS MAXIMUM MM |
| First End Style | CHAMFERED |
| Undercut Width | 0.750 MILLIMETERS MINIMUM AND 0.850 MILLIMETERS MAXIMUM MM |
| Undercut Diameter | 6.000 MILLIMETERS NOMINAL MM |
| First End Taper Length | 0.050 MILLIMETERS NOMINAL MM |
| First End Location | BOTH ENDS |
| Style Designator | GROOVE |
| Second End Relationship with First End | IDENTICAL |
| Effective Length | 27.000 MILLIMETERS NOMINAL MM |
| Diameter | 8.000 MILLIMETERS NOMINAL MM |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| 57012 PRIMARY | Sauer-Danfoss /hillsboro/ Co (USA) |
NSN 5315-01-382-4505 is a Pin,grooved,headless, manufactured by Sauer-Danfoss /hillsboro/ Co, classified under FSC 5315 (No Item Name Available). Status: active.
NSN 5315-01-382-4505 has 1 cross-referenced part number: 57012 (Sauer-Danfoss /hillsboro/ Co).
There are 5 known substitutes for 5315-01-382-4505: 5120-00-242-7410, 5331-01-061-3000, 5120-01-335-2102 and 2 more. Verify interchangeability with system specifications before substitution.
Key specifications for 57012: First End Taper Angle: 45.0 DEGREES NOMINAL; Material: STEEL CORROSION RESISTING OVERALL; Second Undercut Width: 0.750 MILLIMETERS MINIMUM AND 0.850 MILLIMETERS MAXIMUM MM; First End Style: CHAMFERED. 13 total characteristics are documented in the Federal Logistics Information System.