The Pin,grooved,headless, cataloged under National Stock Number 5315-01-371-8567, is classified within Federal Supply Class 5315 (No Item Name Available) of the Hardware and Abrasives group. The primary manufacturer of record is Naval Sea Systems Command. Government technical data includes 8 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 2 commercial cross-references from 2 manufacturers, enabling identification through both NSN and commercial part number lookups. 6 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-01-371-8567 |
| Primary Part Number | 6509886 |
| Item Name | Pin,grooved,headless |
| FSC / FSG | 5315 / 53 — No Item Name Available |
| Manufacturer | Naval Sea Systems Command |
| Status | ACTIVE |
| First End Location | BOTH ENDSBOTH ENDS |
| Style Designator | ONE HALF GROOVEONE HALF GROOVE |
| First End Taper Length | 0.042 INCHES MINIMUM AND 0.042 INCHES MINIMUM AND 0.052 INCHES MAXIMUM0.052 INCHES MAXIMUM IN |
| First End Taper Angle | 30.0 DEGREES MINIMUM AND 30.0 DEGREES MINIMUM AND 45.0 DEGREES MAXIMUM45.0 DEGREES MAXIMUM |
| Intermediate Diameter | 0.517 INCHES MINIMUM AND 0.517 INCHES MINIMUM AND 0.521 INCHES MAXIMUM0.521 INCHES MAXIMUM IN |
| First End Style | CHAMFEREDCHAMFERED |
| Pin Small End Diameter | 0.495 INCHES MINIMUM AND 0.495 INCHES MINIMUM AND 0.500 INCHES MAXIMUM0.500 INCHES MAXIMUM IN |
| Second End Relationship with First End | IDENTICALIDENTICAL |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
NSN 5315-01-371-8567 is a Pin,grooved,headless, manufactured by Naval Sea Systems Command, classified under FSC 5315 (No Item Name Available). Status: active.
NSN 5315-01-371-8567 has 2 cross-referenced part numbers: 11037 (Driv-Lok Inc), 6509886 (Naval Sea Systems Command).
There are 6 known substitutes for 5315-01-371-8567: 5331-00-205-3818, 4730-00-712-0570, 4730-00-719-2708 and 3 more. Verify interchangeability with system specifications before substitution.
Key specifications for 6509886: First End Location: BOTH ENDSBOTH ENDS; Style Designator: ONE HALF GROOVEONE HALF GROOVE; First End Taper Length: 0.042 INCHES MINIMUM AND 0.042 INCHES MINIMUM AND 0.052 INCHES MAXIMUM0.052 INCHES MAXIMUM IN; First End Taper Angle: 30.0 DEGREES MINIMUM AND 30.0 DEGREES MINIMUM AND 45.0 DEGREES MAXIMUM45.0 DEGREES MAXIMUM. 9 total characteristics are documented in the Federal Logistics Information System.