The Pin,shoulder,headed, cataloged under National Stock Number 5315-01-370-7206, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 22 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-01-370-7206 |
| Item Name | Pin,shoulder,headed |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| Width Across Flats | 1.750 INCHES NOMINAL IN |
| First End Taper Length | 0.060 INCHES NOMINAL IN |
| First Step Diameter | 1.750 INCHES NOMINAL IN |
| Third Step Diameter | 1.130 INCHES NOMINAL IN |
| Hole Arrangement Style | BOTH END DRILLED |
| Under Head Length | 6.470 INCHES NOMINAL IN |
| First End Style | CHAMFERED |
| First Hole Diameter | 0.187 INCHES NOMINAL IN |
| Second Step Length | 2.330 INCHES NOMINAL IN |
| Style Designator | SHOULDER |
| Material Document and Classification | MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| First End Taper Angle | 45.0 DEGREES NOMINAL |
| Second Hole Diameter | 0.187 INCHES NOMINAL IN |
| Head Style | DISHED HEXAGON |
| Second Step Diameter | 1.250 INCHES NOMINAL IN |
| Center to Center Distance Between Holes | 1.250 INCHES NOMINAL IN |
| Height | 1.250 INCHES NOMINAL IN |
| First Step Length | 0.130 INCHES NOMINAL IN |
| Surface Treatment | PAINT HEAD |
| Material | STEEL COMP 4340 OVERALL |
| Distance From Centerline of Hole to End of Pin | 1.130 INCHES NOMINAL IN |
| Third Step Length | 4.010 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | N |
| Reference | Meaning |
|---|---|
| DAA7257G822-017 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5315-01-370-7206 is a Pin,shoulder,headed, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
Key specifications for 5315-01-370-7206: Width Across Flats: 1.750 INCHES NOMINAL IN; First End Taper Length: 0.060 INCHES NOMINAL IN; First Step Diameter: 1.750 INCHES NOMINAL IN; Third Step Diameter: 1.130 INCHES NOMINAL IN. 22 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.