The Pin,grooved,headless, cataloged under National Stock Number 5315-01-359-3735, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 11 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-01-359-3735 |
| Item Name | Pin,grooved,headless |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| Undercut Width | 0.056 INCHES MINIMUM AND 0.056 INCHES MINIMUM AND 0.060 INCHES MAXIMUM0.060 INCHES MAXIMUM IN |
| First End Taper Length | 0.060 INCHES NOMINAL0.060 INCHES NOMINAL IN |
| Undercut Diameter | 1.402 INCHES MINIMUM AND 1.402 INCHES MINIMUM AND 1.410 INCHES MAXIMUM1.410 INCHES MAXIMUM IN |
| First End Location | CHAMFERED ENDCHAMFERED END |
| First End Style | CHAMFEREDCHAMFERED |
| Style Designator | GROOVEGROOVE |
| Diameter | 1.4977 INCHES MINIMUM AND 1.4977 INCHES MINIMUM AND 1.4983 INCHES MAXIMUM1.4983 INCHES MAXIMUM IN |
| First End Taper Angle | 45.0 DEGREES NOMINAL45.0 DEGREES NOMINAL |
| Second End Relationship with First End | IDENTICALIDENTICAL |
| Effective Length | 3.125 INCHES NOMINAL3.125 INCHES NOMINAL IN |
| Second Undercut Width | 0.056 INCHES MINIMUM AND 0.056 INCHES MINIMUM AND 0.060 INCHES MAXIMUM0.060 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| SW23682 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5315-01-359-3735 is a Pin,grooved,headless, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
Key specifications for 5315-01-359-3735: Undercut Width: 0.056 INCHES MINIMUM AND 0.056 INCHES MINIMUM AND 0.060 INCHES MAXIMUM0.060 INCHES MAXIMUM IN; First End Taper Length: 0.060 INCHES NOMINAL0.060 INCHES NOMINAL IN; Undercut Diameter: 1.402 INCHES MINIMUM AND 1.402 INCHES MINIMUM AND 1.410 INCHES MAXIMUM1.410 INCHES MAXIMUM IN; First End Location: CHAMFERED ENDCHAMFERED END. 11 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.