The Pin,shoulder,headless, cataloged under National Stock Number 5315-01-355-0152, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. The manufacturer of record is Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate. Government technical data includes 22 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-01-355-0152 |
| Primary Part Number | 12910554 |
| Item Name | Pin,shoulder,headless |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Manufacturer | Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate |
| Status | ACTIVE |
| Shank Diameter | 0.619 INCHES MINIMUM AND 0.624 INCHES MAXIMUM IN |
| Second Shank Diameter | 0.619 INCHES MINIMUM AND 0.624 INCHES MAXIMUM IN |
| Undercut Width | 0.090 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN |
| First End Taper Length | 0.450 INCHES NOMINAL IN |
| Undercut Diameter | 0.470 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN |
| First End Location | THREADED END |
| Surface Treatment Document and Classification | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.780 INCHES MINIMUM AND 0.840 INCHES MAXIMUM IN |
| First End Style | CHAMFERED |
| Shank Length | 1.140 INCHES NOMINAL IN |
| Style Designator | UNDERCUT |
| Material Document and Classification | QQ-S-694 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-S-637 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| First End Taper Angle | 12.0 DEGREES MINIMUM AND 18.0 DEGREES MAXIMUM |
| Second End Relationship with First End | NOT IDENTICAL |
| Thread Direction | RIGHT-HAND |
| Nominal Thread Size | 0.625 INCHES IN |
| Shoulder Diameter | 0.980 INCHES MINIMUM AND 1.002 INCHES MAXIMUM IN |
| Second Shank Length | 2.070 INCHES MINIMUM AND 2.110 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Second End Style | SQUARE |
| Thread Class | 2A A |
| Material | STEEL OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 12910554 PRIMARY | Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate (USA) |
NSN 5315-01-355-0152 is a Pin,shoulder,headless, manufactured by Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
NSN 5315-01-355-0152 has 1 manufacturer part number on file: 12910554 (Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate).
Key specifications for 12910554: Shank Diameter: 0.619 INCHES MINIMUM AND 0.624 INCHES MAXIMUM IN; Second Shank Diameter: 0.619 INCHES MINIMUM AND 0.624 INCHES MAXIMUM IN; Undercut Width: 0.090 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN; First End Taper Length: 0.450 INCHES NOMINAL IN. 22 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.