PartsTable TECHNICAL DATA SHEET
NSN 5315-01-318-2132Government record, cited

Pin, Shoulder, Headless5315-01-318-2132

NSN 5315-01-318-2132 · NIIN 013182132 · Part number P013182132
Defense Logistics Agency Dba Defense Supply Center Philadelphia · FSC 5315 — Nails, Machine Keys, and Pins · FSG 53 — Hardware and Abrasives · CAGE 14153
Government record, cited
NSN 5315-01-318-2132 — this item is cataloged by the U.S. Government under National Stock Number 5315-01-318-2132. Manufacturer of record part number: P013182132.
Also searched as  5315-01-318-2132 · 5315013182132 · NIIN 013182132 · 01-318-2132 · FSC 5315 Nails, Machine Keys, and Pins · CAGE 14153 · P013182132 · 130141-1 · 130141-1 · LL-HG6-4867 · PO0-428
Nearby stock numbers  ·
Features
  • Pin,shoulder,headless — FSC 5315
  • Shank Diameter: 0.0625 INCHES NOMINAL IN
  • Second Shank Diameter: 0.122 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
  • First End Location: RADIUS END
  • Special Test Features: SPECIAL QUALITY CONTROL TESTING
  • First End Style: ROUND
  • Shank Length: 0.313 INCHES NOMINAL IN
  • Criticality Code Justification: ZZZY
Identification
  • NSN: 5315-01-318-2132
  • NIIN: 013182132
  • FSC: 5315 — Nails, Machine Keys, and Pins
  • FSG: 53 — Hardware and Abrasives
  • Primary part number: P013182132
  • Manufacturer: Defense Logistics Agency Dba Defense Supply Center Philadelphia
General Description

The Pin,shoulder,headless, cataloged under National Stock Number 5315-01-318-2132, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. The manufacturer of record is Defense Logistics Agency Dba Defense Supply Center Philadelphia. Government technical data includes 17 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5315-01-318-2132
Primary Part NumberP013182132
Item NamePin,shoulder,headless
FSC / FSG5315 / 53 — Nails, Machine Keys, and Pins
ManufacturerDefense Logistics Agency Dba Defense Supply Center Philadelphia
StatusACTIVE
Shank Diameter0.0625 INCHES NOMINAL IN
Second Shank Diameter0.122 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
First End LocationRADIUS END
Special Test FeaturesSPECIAL QUALITY CONTROL TESTING
First End StyleROUND
Shank Length0.313 INCHES NOMINAL IN
Criticality Code JustificationZZZY
Style DesignatorSHOULDER
Material Document and ClassificationASTM A581 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
Second End Relationship with First EndNOT IDENTICAL
Shoulder Diameter0.188 INCHES NOMINAL IN
Second Shank Length0.086 INCHES MINIMUM AND 0.092 INCHES MAXIMUM IN
Surface TreatmentPASSIVATE OVERALL
Second End StyleSQUARE
Test Data Document81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
MaterialSTEEL COMP 303 OVERALL
Reference Number Differentiating CharacteristicsAS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeS
Cross-Reference Index
Part NumberManufacturer
P013182132 Defense Logistics Agency Dba Defense Supply Center Philadelphia (USA)
Reference documents
ReferenceMeaning
130141-1 3/1 Design control — primary reference
U.S. Government activity
130141-1 5/1 Secondary reference
U.S. Government activity
LL-HG6-4867 5/9 Secondary reference
Defense Logistics Agency Dba Defense Supply Center Philadelphia
PO0-428 5/9 Secondary reference
Defense Logistics Agency Dba Defense Supply Center Philadelphia

Frequently Asked Questions

What is NSN 5315-01-318-2132?

NSN 5315-01-318-2132 is a Pin,shoulder,headless, manufactured by Defense Logistics Agency Dba Defense Supply Center Philadelphia, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.

What part numbers are listed for NSN 5315-01-318-2132?

NSN 5315-01-318-2132 has 1 manufacturer part number on file: P013182132 (Defense Logistics Agency Dba Defense Supply Center Philadelphia).

What are the specifications of P013182132?

Key specifications for P013182132: Shank Diameter: 0.0625 INCHES NOMINAL IN; Second Shank Diameter: 0.122 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN; First End Location: RADIUS END; Special Test Features: SPECIAL QUALITY CONTROL TESTING. 17 specifications are documented in the U.S. Government catalog.

Is NSN 5315-01-318-2132 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com