The Pin,grooved,headed, cataloged under National Stock Number 5315-01-318-2116, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-01-318-2116 |
| Item Name | Pin,grooved,headed |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| Undercut Width | 0.031 INCHES NOMINAL IN |
| Undercut Diameter | 0.280 INCHES NOMINAL IN |
| Surface Treatment Document and Classification | MIL-L-46010 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| First End Counterbore Diameter | 0.156 INCHES MINIMUM AND 0.161 INCHES MAXIMUM IN |
| Under Head Length | 1.328 INCHES NOMINAL IN |
| First End Style | COUNTERBORED W/O THRU HOLE |
| Hardness Rating | 36.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM OVERALL |
| Style Designator | GROOVE |
| Pin Head Diameter | 0.375 INCHES NOMINAL IN |
| Material Document and Classification | AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Diameter | 0.310 INCHES MINIMUM AND 0.311 INCHES MAXIMUM IN |
| Head Style | FLAT |
| Height | 0.062 INCHES NOMINAL IN |
| Surface Treatment | LUBRICANT OVERALL |
| Internal Drive Style | TORQUE |
| Material | STEEL COMP 630 OVERALL |
| First End Counterbore Depth | 0.215 INCHES MINIMUM AND 0.217 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 1532369 | 3/9 Design control — primary reference Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier |
| 5315PL0893503 | 6/9 Informative reference only Jednolity Indeks Materialowy - Uniform Material Index |
NSN 5315-01-318-2116 is a Pin,grooved,headed, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
Key specifications for 5315-01-318-2116: Undercut Width: 0.031 INCHES NOMINAL IN; Undercut Diameter: 0.280 INCHES NOMINAL IN; Surface Treatment Document and Classification: MIL-L-46010 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL; First End Counterbore Diameter: 0.156 INCHES MINIMUM AND 0.161 INCHES MAXIMUM IN. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.