The Pin,grooved,headed, cataloged under National Stock Number 5315-01-311-9060, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. The manufacturer of record is Dyncorp International Llc. Government technical data includes 17 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-01-311-9060 |
| Primary Part Number | 110-1335-11 |
| Item Name | Pin,grooved,headed |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Manufacturer | Dyncorp International Llc |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES OUTSIDE DIAMETER |
| Undercut Width | 0.012 INCHES MINIMUM AND 0.014 INCHES MAXIMUM IN |
| First End Taper Length | 0.037 INCHES MINIMUM AND 0.057 INCHES MAXIMUM IN |
| Undercut Diameter | 0.1445 INCHES MINIMUM AND 0.1475 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Under Head Length | 1.412 INCHES MINIMUM AND 1.432 INCHES MAXIMUM IN |
| First End Style | CHAMFERED |
| Style Designator | GROOVE |
| Pin Head Diameter | 0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN |
| Material Document and Classification | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Diameter | 0.1545 INCHES MINIMUM AND 0.1555 INCHES MAXIMUM IN |
| First End Taper Angle | 15.0 DEGREES NOMINAL |
| Effective Length | 1.250 INCHES MINIMUM AND 1.265 INCHES MAXIMUM IN |
| Head Style | PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION) |
| Height | 0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN |
| Surface Treatment | PASSIVATE OVERALL |
| Material | STEEL COMP 630 OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 110-1335-11 PRIMARY | Dyncorp International Llc (USA) |
| Reference | Meaning |
|---|---|
| 110-1335-11 | 3/9 Design control — primary reference Dyncorp Div North American Public Sector |
NSN 5315-01-311-9060 is a Pin,grooved,headed, manufactured by Dyncorp International Llc, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
NSN 5315-01-311-9060 has 1 manufacturer part number on file: 110-1335-11 (Dyncorp International Llc).
Key specifications for 110-1335-11: Surface Finish: 32.0 MICROINCHES OUTSIDE DIAMETER; Undercut Width: 0.012 INCHES MINIMUM AND 0.014 INCHES MAXIMUM IN; First End Taper Length: 0.037 INCHES MINIMUM AND 0.057 INCHES MAXIMUM IN; Undercut Diameter: 0.1445 INCHES MINIMUM AND 0.1475 INCHES MAXIMUM IN. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.