The Pin,straight,headed, cataloged under National Stock Number 5315-01-305-5559, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 15 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-01-305-5559 |
| Item Name | Pin,straight,headed |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES OUTSIDE DIAMETER |
| Chamfer Length | 0.040 INCHES MAXIMUM IN |
| Hole Arrangement Style | ONE END DRILLED |
| Under Head Length | 0.448 INCHES MINIMUM AND 0.458 INCHES MAXIMUM IN |
| Pin Chamfer Angle | 15.0 DEGREES MINIMUM AND 25.0 DEGREES MAXIMUM |
| First Hole Diameter | 0.065 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN |
| Hardness Rating | 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL |
| Style Designator | STRAIGHT |
| Pin Head Diameter | 0.307 INCHES MINIMUM IN |
| Material Document and Classification | AMS 5616 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Diameter | 0.1869 INCHES MINIMUM AND 0.1874 INCHES MAXIMUM IN |
| Head Style | PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION) |
| Height | 0.035 INCHES NOMINAL IN |
| Material | STEEL COMP 615 OVERALL |
| Distance From Centerline of Hole to End of Pin | 0.075 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS9844-05 | 5/9 Secondary reference U.S. Government activity |
| MS9844-05 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5315-01-305-5559 is a Pin,straight,headed, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
Key specifications for 5315-01-305-5559: Surface Finish: 32.0 MICROINCHES OUTSIDE DIAMETER; Chamfer Length: 0.040 INCHES MAXIMUM IN; Hole Arrangement Style: ONE END DRILLED; Under Head Length: 0.448 INCHES MINIMUM AND 0.458 INCHES MAXIMUM IN. 15 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.