The Pin,eccentric, cataloged under National Stock Number 5315-01-267-1260, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 15 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-01-267-1260 |
| Item Name | Pin,eccentric |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Status | ACTIVE |
| Surface Finish | 63.0 MICROINCHES BEARING |
| Width Across Flats | 0.812 INCHES NOMINAL IN |
| Offset Distance Between Geometric Center of Head and Centerline of Shank/shoulder | 0.090 INCHES NOMINAL IN |
| First Step Diameter | 0.684 INCHES MINIMUM AND 0.685 INCHES MAXIMUM IN |
| Numeric Designation of Step Eccentric to Head | 2 |
| Second Step Length | 3.474 INCHES MINIMUM AND 3.484 INCHES MAXIMUM IN |
| Style Designator | ECCENTRIC |
| Pin Head Diameter | 0.938 INCHES NOMINAL IN |
| Material Document and Classification | MIL-S-6758 COND D4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Head Style | ROUND W/WRENCH FLATS |
| Second Step Diameter | 0.4919 INCHES MINIMUM AND 0.4980 INCHES MAXIMUM IN |
| Height | 0.145 INCHES NOMINAL IN |
| First Step Length | 0.703 INCHES MINIMUM AND 0.713 INCHES MAXIMUM IN |
| Internal Drive Style | SLOT |
| Material | STEEL COMP 4130 OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | F |
| Reference | Meaning |
|---|---|
| 249-53013 | 3/9 Design control — primary reference U.S. Government activity |
NSN 5315-01-267-1260 is a Pin,eccentric, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
Key specifications for 5315-01-267-1260: Surface Finish: 63.0 MICROINCHES BEARING; Width Across Flats: 0.812 INCHES NOMINAL IN; Offset Distance Between Geometric Center of Head and Centerline of Shank/shoulder: 0.090 INCHES NOMINAL IN; First Step Diameter: 0.684 INCHES MINIMUM AND 0.685 INCHES MAXIMUM IN. 15 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.