PartsTable TECHNICAL DATA SHEET
NSN 5315-01-260-1477Government record, cited

Pin, Grooved, Headed5315-01-260-1477

NSN 5315-01-260-1477 · NIIN 012601477 · Part number 2007409-11
Cm Manufacturing Inc Dba Cm Manufacturing Inc · FSC 5315 — Nails, Machine Keys, and Pins · FSG 53 — Hardware and Abrasives · CAGE 6Z056
Government record, cited
NSN 5315-01-260-1477 — this item is cataloged by the U.S. Government under National Stock Number 5315-01-260-1477. Manufacturer of record part number: 2007409-11.
Also searched as  5315-01-260-1477 · 5315012601477 · NIIN 012601477 · 01-260-1477 · FSC 5315 Nails, Machine Keys, and Pins · CAGE 6Z056 · 2007409-11 · 5315PL0851070
Nearby stock numbers  ·
Features
  • Pin,grooved,headed — FSC 5315
  • Width Across Flats: 0.740 INCHES MINIMUM AND 0.752 INCHES MAXIMUM IN
  • First End Taper Length: 0.040 INCHES NOMINAL IN
  • Undercut Diameter: 0.357 INCHES MINIMUM AND 0.365 INCHES MAXIMUM IN
  • Surface Treatment Document and Classification: 595 FED STD SINGLE TREATMENT RESPONSE OVERALL
  • Under Head Length: 5.000 INCHES NOMINAL IN
  • First End Style: CHAMFERED
  • Supplementary Features: ITEM IS F-16 LANDING GEAR SPECIFIC
Identification
  • NSN: 5315-01-260-1477
  • NIIN: 012601477
  • FSC: 5315 — Nails, Machine Keys, and Pins
  • FSG: 53 — Hardware and Abrasives
  • Primary part number: 2007409-11
  • Manufacturer: Cm Manufacturing Inc Dba Cm Manufacturing Inc
General Description

The Pin,grooved,headed, cataloged under National Stock Number 5315-01-260-1477, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. The manufacturer of record is Cm Manufacturing Inc Dba Cm Manufacturing Inc. Government technical data includes 18 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5315-01-260-1477
Primary Part Number2007409-11
Item NamePin,grooved,headed
FSC / FSG5315 / 53 — Nails, Machine Keys, and Pins
ManufacturerCm Manufacturing Inc Dba Cm Manufacturing Inc
StatusACTIVE
Width Across Flats0.740 INCHES MINIMUM AND 0.752 INCHES MAXIMUM IN
First End Taper Length0.040 INCHES NOMINAL IN
Undercut Diameter0.357 INCHES MINIMUM AND 0.365 INCHES MAXIMUM IN
Surface Treatment Document and Classification595 FED STD SINGLE TREATMENT RESPONSE OVERALL
Under Head Length5.000 INCHES NOMINAL IN
First End StyleCHAMFERED
Supplementary FeaturesITEM IS F-16 LANDING GEAR SPECIFIC
Criticality Code JustificationSUPP
Style DesignatorGROOVE
Material Document and ClassificationAMS 6411 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
Diameter0.4375 INCHES NOMINAL IN
First End Taper Angle45.0 DEGREES NOMINAL
Effective Length4.420 INCHES NOMINAL IN
Head StyleHEXAGON
Height0.250 INCHES NOMINAL IN
Surface TreatmentPAINT OVERALL
Undercut Radius0.030 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
MaterialSTEEL UNS K23080 OVERALL
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
2007409-11 Cm Manufacturing Inc Dba Cm Manufacturing Inc (USA)
2007409-11 Apex Manufacturing Company, Inc. Dba Apex Manufacturing Co (USA)
Reference documents
ReferenceMeaning
2007409-11 3/9 Design control — primary reference
Goodrich Corp Dba Goodrich Corp
5315PL0851070 6/9 Informative reference only
Jednolity Indeks Materialowy - Uniform Material Index
No interchangeability data on file.
Other items in FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037
5315-00-000-1037 · Item name not on file
5315-00-000-1067
5315-00-000-1067 · Item name not on file
5315-00-000-1245
5315-00-000-1245 · Item name not on file
5315-00-000-1372
5315-00-000-1372 · Item name not on file
5315-00-000-1412
5315-00-000-1412 · Item name not on file
5315-00-001-1571
PIN
5315-00-001-1572
PIN,LINKAGE
5315-00-001-1602
5315-00-001-1602 · Item name not on file

Frequently Asked Questions

What is NSN 5315-01-260-1477?

NSN 5315-01-260-1477 is a Pin,grooved,headed, manufactured by Cm Manufacturing Inc Dba Cm Manufacturing Inc, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.

What part numbers are listed for NSN 5315-01-260-1477?

NSN 5315-01-260-1477 has 2 manufacturer part numbers on file: 2007409-11 (Cm Manufacturing Inc Dba Cm Manufacturing Inc), 2007409-11 (Apex Manufacturing Company, Inc. Dba Apex Manufacturing Co).

What are the specifications of 2007409-11?

Key specifications for 2007409-11: Width Across Flats: 0.740 INCHES MINIMUM AND 0.752 INCHES MAXIMUM IN; First End Taper Length: 0.040 INCHES NOMINAL IN; Undercut Diameter: 0.357 INCHES MINIMUM AND 0.365 INCHES MAXIMUM IN; Surface Treatment Document and Classification: 595 FED STD SINGLE TREATMENT RESPONSE OVERALL. 18 specifications are documented in the U.S. Government catalog.

Is NSN 5315-01-260-1477 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com