The Pin,straight,headless, cataloged under National Stock Number 5315-01-259-6464, is classified within Federal Supply Class 5315 (No Item Name Available) of the Hardware and Abrasives group. The primary manufacturer of record is W. M. Berg, Inc.. Government technical data includes 13 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 2 commercial cross-references from 2 manufacturers, enabling identification through both NSN and commercial part number lookups. 3 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-01-259-6464 |
| Primary Part Number | D25-2 |
| Item Name | Pin,straight,headless |
| FSC / FSG | 5315 / 53 — No Item Name Available |
| Manufacturer | W. M. Berg, Inc. |
| Status | ACTIVE |
| Pin Overall Diameter | 0.1251 INCHES MINIMUM AND 0.1253 INCHES MAXIMUM IN |
| Hardness Rating | 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| First End Style | CHAMFERED |
| Second End Relationship with First End | NOT IDENTICAL |
| Material | STEEL COMP 416 OVERALL |
| Surface Treatment | PASSIVATE OVERALL |
| Material Document and Classification | ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Surface Treatment Document and Classification | ASTM A380 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| First End Taper Angle | 20.0 DEGREES MINIMUM AND 30.0 DEGREES MAXIMUM |
| Pin Overall Length | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN |
| First End Taper Length | 0.016 INCHES MINIMUM AND 0.041 INCHES MAXIMUM IN |
| Second End Style | CHAMFERED |
| Second End Taper Angle | 4.0 DEGREES MINIMUM AND 12.0 DEGREES MAXIMUM |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
NSN 5315-01-259-6464 is a Pin,straight,headless, manufactured by W. M. Berg, Inc., classified under FSC 5315 (No Item Name Available). Status: active.
NSN 5315-01-259-6464 has 2 cross-referenced part numbers: D25-2 (W. M. Berg, Inc.), 5614430-8 (Naval Sea Systems Command).
There are 3 known substitutes for 5315-01-259-6464: 4320-00-060-3213, 5998-00-163-3248, 3120-00-414-1469. Verify interchangeability with system specifications before substitution.
Key specifications for D25-2: Pin Overall Diameter: 0.1251 INCHES MINIMUM AND 0.1253 INCHES MAXIMUM IN; Hardness Rating: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL; First End Style: CHAMFERED; Second End Relationship with First End: NOT IDENTICAL. 13 total characteristics are documented in the Federal Logistics Information System.