PartsTable TECHNICAL DATA SHEET
NSN 5315-01-257-7799Government record, cited

Pin, Straight, Headless5315-01-257-7799

NSN 5315-01-257-7799 · NIIN 012577799 · Part number U43490
Deere & Co · FSC 5315 — Nails, Machine Keys, and Pins · FSG 53 — Hardware and Abrasives · CAGE 75160
Government record, cited
NSN 5315-01-257-7799 — this item is cataloged by the U.S. Government under National Stock Number 5315-01-257-7799. Manufacturer of record part number: U43490.
Also searched as  5315-01-257-7799 · 5315012577799 · NIIN 012577799 · 01-257-7799 · FSC 5315 Nails, Machine Keys, and Pins · CAGE 75160 · U43490
Nearby stock numbers  ·
Features
  • Pin,straight,headless — FSC 5315
  • First End Taper Length: 0.080 INCHES MINIMUM AND 0.160 INCHES MAXIMUM IN
  • Second End Taper Angle: 9.0 DEGREES MINIMUM AND 12.0 DEGREES MAXIMUM
  • Hole Arrangement Style: BOTH END DRILLED
  • First End Style: CHAMFERED
  • First Hole Diameter: 0.406 INCHES NOMINAL IN
  • Material Document and Classification: JDM-F AO CAGEC 75160 MFR REF SINGLE MATERIAL RESPONSE OVERALL
  • Second End Taper Length: 0.720 INCHES NOMINAL IN
Identification
  • NSN: 5315-01-257-7799
  • NIIN: 012577799
  • FSC: 5315 — Nails, Machine Keys, and Pins
  • FSG: 53 — Hardware and Abrasives
  • Primary part number: U43490
  • Manufacturer: Deere & Co
General Description

The Pin,straight,headless, cataloged under National Stock Number 5315-01-257-7799, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. The manufacturer of record is Deere & Co. Government technical data includes 16 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5315-01-257-7799
Primary Part NumberU43490
Item NamePin,straight,headless
FSC / FSG5315 / 53 — Nails, Machine Keys, and Pins
ManufacturerDeere & Co
StatusACTIVE
First End Taper Length0.080 INCHES MINIMUM AND 0.160 INCHES MAXIMUM IN
Second End Taper Angle9.0 DEGREES MINIMUM AND 12.0 DEGREES MAXIMUM
Hole Arrangement StyleBOTH END DRILLED
First End StyleCHAMFERED
First Hole Diameter0.406 INCHES NOMINAL IN
Material Document and ClassificationJDM-F AO CAGEC 75160 MFR REF SINGLE MATERIAL RESPONSE OVERALL
Second End Taper Length0.720 INCHES NOMINAL IN
First End Taper Angle45.0 DEGREES NOMINAL
Pin Overall Diameter1.5000 INCHES NOMINAL IN
Pin Overall Length5.120 INCHES MINIMUM AND 5.240 INCHES MAXIMUM IN
Second End Relationship with First EndNOT IDENTICAL
Second Hole Diameter0.406 INCHES NOMINAL IN
Center to Center Distance Between Holes4.250 INCHES NOMINAL IN
Second End StyleCHAMFERED
MaterialSTEEL COMP 1045 OVERALL
Distance From Centerline of Hole to End of Pin0.430 INCHES NOMINAL IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
U43490 PRIMARY Deere & Co (USA)
No interchangeability data on file.
Other items in FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037
5315-00-000-1037 · Item name not on file
5315-00-000-1067
5315-00-000-1067 · Item name not on file
5315-00-000-1245
5315-00-000-1245 · Item name not on file
5315-00-000-1372
5315-00-000-1372 · Item name not on file
5315-00-000-1412
5315-00-000-1412 · Item name not on file
5315-00-001-1571
PIN
5315-00-001-1572
PIN,LINKAGE
5315-00-001-1602
5315-00-001-1602 · Item name not on file

Frequently Asked Questions

What is NSN 5315-01-257-7799?

NSN 5315-01-257-7799 is a Pin,straight,headless, manufactured by Deere & Co, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.

What part numbers are listed for NSN 5315-01-257-7799?

NSN 5315-01-257-7799 has 1 manufacturer part number on file: U43490 (Deere & Co).

What are the specifications of U43490?

Key specifications for U43490: First End Taper Length: 0.080 INCHES MINIMUM AND 0.160 INCHES MAXIMUM IN; Second End Taper Angle: 9.0 DEGREES MINIMUM AND 12.0 DEGREES MAXIMUM; Hole Arrangement Style: BOTH END DRILLED; First End Style: CHAMFERED. 16 specifications are documented in the U.S. Government catalog.

Is NSN 5315-01-257-7799 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com