The Pin,shoulder,headed, cataloged under National Stock Number 5315-01-217-6449, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. The manufacturer of record is General Electric Company. Government technical data includes 13 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-01-217-6449 |
| Primary Part Number | 1358M70P02 |
| Item Name | Pin,shoulder,headed |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Manufacturer | General Electric Company |
| Status | ACTIVE |
| First End Taper Length | 0.010 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN |
| First Step Diameter | 0.1020 INCHES MINIMUM AND 0.1030 INCHES MAXIMUM IN |
| Under Head Length | 0.454 INCHES MINIMUM AND 0.473 INCHES MAXIMUM IN |
| First End Style | CHAMFERED |
| Second Step Length | 0.310 INCHES MINIMUM AND 0.330 INCHES MAXIMUM IN |
| Style Designator | SHOULDER |
| Pin Head Diameter | 0.117 INCHES MINIMUM AND 0.119 INCHES MAXIMUM IN |
| First End Taper Angle | 45.0 DEGREES NOMINAL |
| Head Style | FLAT |
| Second Step Diameter | 0.086 INCHES MINIMUM AND 0.088 INCHES MAXIMUM IN |
| Height | 0.015 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN |
| First Step Length | 0.143 INCHES MINIMUM AND 0.144 INCHES MAXIMUM IN |
| Material | COBALT COMP L-605 OVERALL |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 1358M70P01 | General Electric Company (USA) |
| 1358M70P02 PRIMARY | General Electric Company (USA) |
NSN 5315-01-217-6449 is a Pin,shoulder,headed, manufactured by General Electric Company, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
NSN 5315-01-217-6449 has 2 manufacturer part numbers on file: 1358M70P01 (General Electric Company), 1358M70P02 (General Electric Company).
Key specifications for 1358M70P02: First End Taper Length: 0.010 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN; First Step Diameter: 0.1020 INCHES MINIMUM AND 0.1030 INCHES MAXIMUM IN; Under Head Length: 0.454 INCHES MINIMUM AND 0.473 INCHES MAXIMUM IN; First End Style: CHAMFERED. 13 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.