PartsTable TECHNICAL DATA SHEET
NSN 5315-01-213-5562Government record, cited

Pin, Shoulder, Headless5315-01-213-5562

NSN 5315-01-213-5562 · NIIN 012135562
FSC 5315 — Nails, Machine Keys, and Pins · FSG 53 — Hardware and Abrasives
Government record, cited
Also searched as  5315-01-213-5562 · 5315012135562 · NIIN 012135562 · 01-213-5562 · FSC 5315 Nails, Machine Keys, and Pins · 3329226 · 3329376
Nearby stock numbers  ·
Features
  • Pin,shoulder,headless — FSC 5315
  • Shank Diameter: 0.0932 INCHES MINIMUM AND 0.0934 INCHES MAXIMUM IN
  • Surface Finish: 16.0 MICROINCHES OUTSIDE DIAMETER
  • First End Taper Length: 0.050 INCHES NOMINAL IN
  • First End Location: SHANK END
  • Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
  • Thread Length: 0.415 INCHES NOMINAL IN
  • First End Style: CHAMFERED
Identification
  • NSN: 5315-01-213-5562
  • NIIN: 012135562
  • FSC: 5315 — Nails, Machine Keys, and Pins
  • FSG: 53 — Hardware and Abrasives
General Description

The Pin,shoulder,headless, cataloged under National Stock Number 5315-01-213-5562, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. Government technical data includes 23 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5315-01-213-5562
Item NamePin,shoulder,headless
FSC / FSG5315 / 53 — Nails, Machine Keys, and Pins
StatusACTIVE
Shank Diameter0.0932 INCHES MINIMUM AND 0.0934 INCHES MAXIMUM IN
Surface Finish16.0 MICROINCHES OUTSIDE DIAMETER
First End Taper Length0.050 INCHES NOMINAL IN
First End LocationSHANK END
Surface Treatment Document and ClassificationQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
Thread Length0.415 INCHES NOMINAL IN
First End StyleCHAMFERED
Shank Length1.720 INCHES NOMINAL IN
Style DesignatorSHOULDER
Material Document and ClassificationMIL-S-18732 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
First End Taper Angle15.0 DEGREES NOMINAL
Second End Relationship with First EndNOT IDENTICAL
Second End Slot Depth0.040 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN
Thread DirectionRIGHT-HAND
Nominal Thread Size0.138 INCHES IN
Shoulder Diameter0.138 INCHES NOMINAL IN
Second End Slot Width0.025 INCHES MINIMUM AND 0.032 INCHES MAXIMUM IN
Surface TreatmentPASSIVATE OVERALL
Shear Strength200000 DOUBLE POUNDS PER SQUARE INCH
Second End StyleSLOTTED
Thread Class2A A
MaterialSTEEL COMP 431 OVERALL
Thread Series DesignatorUNIFIED NATIONAL COARSE (UNC)
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
3329226 3/2 Design control — primary reference
U.S. Government activity
3329376 C/1 Advisory reference — outside the item-of-supply concept
U.S. Government activity
No interchangeability data on file.
Other items in FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037
5315-00-000-1037 · Item name not on file
5315-00-000-1067
5315-00-000-1067 · Item name not on file
5315-00-000-1245
5315-00-000-1245 · Item name not on file
5315-00-000-1372
5315-00-000-1372 · Item name not on file
5315-00-000-1412
5315-00-000-1412 · Item name not on file
5315-00-001-1571
PIN
5315-00-001-1572
PIN,LINKAGE
5315-00-001-1602
5315-00-001-1602 · Item name not on file

Frequently Asked Questions

What is NSN 5315-01-213-5562?

NSN 5315-01-213-5562 is a Pin,shoulder,headless, classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.

What are the specifications of 5315-01-213-5562?

Key specifications for 5315-01-213-5562: Shank Diameter: 0.0932 INCHES MINIMUM AND 0.0934 INCHES MAXIMUM IN; Surface Finish: 16.0 MICROINCHES OUTSIDE DIAMETER; First End Taper Length: 0.050 INCHES NOMINAL IN; First End Location: SHANK END. 23 specifications are documented in the U.S. Government catalog.

Is NSN 5315-01-213-5562 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com