The Pin,grooved,headed, cataloged under National Stock Number 5315-01-199-2095, is classified within Federal Supply Class 5315 (Nails, Machine Keys, and Pins) of the Hardware and Abrasives group. The manufacturer of record is Saf-Holland, Inc.. Government technical data includes 16 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5315-01-199-2095 |
| Primary Part Number | XA-1016-C |
| Item Name | Pin,grooved,headed |
| FSC / FSG | 5315 / 53 — Nails, Machine Keys, and Pins |
| Manufacturer | Saf-Holland, Inc. |
| Status | ACTIVE |
| Surface Finish | 63.0 MICROINCHES OVERALL |
| Undercut Width | 0.120 INCHES NOMINAL IN |
| First End Taper Length | 0.060 INCHES NOMINAL IN |
| Undercut Diameter | 1.100 INCHES MINIMUM AND 1.120 INCHES MAXIMUM IN |
| Hole Arrangement Style | ONE END DRILLED |
| Under Head Length | 3.250 INCHES NOMINAL IN |
| First End Style | CHAMFERED |
| First Hole Diameter | 0.250 INCHES NOMINAL IN |
| Style Designator | GROOVE |
| Pin Head Diameter | 1.247 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN |
| Diameter | 1.127 INCHES MINIMUM AND 1.128 INCHES MAXIMUM IN |
| First End Taper Angle | 45.0 DEGREES NOMINAL |
| Head Style | FLAT |
| Height | 0.110 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN |
| Material | STEEL OVERALL |
| Distance From Centerline of Hole to End of Pin | 0.250 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
NSN 5315-01-199-2095 is a Pin,grooved,headed, manufactured by Saf-Holland, Inc., classified under FSC 5315, Nails, Machine Keys, and Pins. Status: active.
NSN 5315-01-199-2095 has 2 manufacturer part numbers on file: XA-1016-C (Saf-Holland, Inc.), 2CF116 (Oshkosh Defense Llc).
Key specifications for XA-1016-C: Surface Finish: 63.0 MICROINCHES OVERALL; Undercut Width: 0.120 INCHES NOMINAL IN; First End Taper Length: 0.060 INCHES NOMINAL IN; Undercut Diameter: 1.100 INCHES MINIMUM AND 1.120 INCHES MAXIMUM IN. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.